MINI 1275GT MOT Results

Registered in 1980
67.9% pass rate
from 56 tests in 2020
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1980 cars and highlighted areas where the MINI 1275GT is unusually good or bad.

  • 13% fail on Lamps, reflectors and electrical equipment
    • 5.4% fail on Headlamp aim
      • 5.4% fail on Headlamp aim
    • 5.4% fail on Registration plate lamp(s) (3 times worse than other 1980 cars)
    • 3.6% fail on Position lamps
      • 3.6% fail on Position lamp
    • 3.6% fail on Direction indicators
      • 3.6% fail on Flashing type
        • 1.8% fail on Individual direction indicators
        • 1.8% fail on Switch
    • 1.8% fail on Front and rear fog lamps
      • 1.8% fail on Rear fog lamp
        • 1.8% fail on Rear fog lamp
  • 8.9% fail on Brakes
    • 8.9% fail on Brake performance
      • 7.1% fail on Service brake performance
        • 7.1% fail on Rbt
          • 7.1% fail on Service brake performance
      • 5.4% fail on Service Brake Efficiency (sp)
        • 5.4% fail on Rbt (sp)
          • 3.6% fail on Service brake performance
          • 3.6% fail on Service brake imbalance
      • 1.8% fail on Parking brake efficiency (sp)
        • 1.8% fail on Rbt (sp)
  • 8.9% fail on Noise, emissions and leaks
    • 8.9% fail on Exhaust emissions
      • 8.9% fail on Spark ignition
        • 8.9% fail on Non catalyst emissions
    • 1.8% fail on Fluid leaks
      • 1.8% fail on Engine oil leaks
  • 7.1% fail on Steering
    • 3.6% fail on Steering wheel (18 times worse than other 1980 cars)
    • 1.8% fail on Steering linkage components
      • 1.8% fail on Track rod end
    • 1.8% fail on Steering column
  • 7.1% fail on Visibility
    • 7.1% fail on Washers
  • 7.1% fail on Suspension
    • 3.6% fail on Component mounting prescribed areas
    • 1.8% fail on Wheel bearings
    • 1.8% fail on Sub-frames
      • 1.8% fail on Sub-frame mounting prescribed areas
    • 1.8% fail on Other suspension component
      • 1.8% fail on Ball joint dust cover
  • 7.1% fail on Body, chassis, structure
    • 5.4% fail on Exhaust system
    • 3.6% fail on Fuel system
      • 1.8% fail on Pipe
      • 1.8% fail on Fuel cap/sealing device
    • 1.8% fail on Transmission
      • 1.8% fail on Drive shafts
        • 1.8% fail on Joints
    • 1.8% fail on Seats
      • 1.8% fail on Driver's seat
  • 1.8% fail on Seat belt installation check
    • 1.8% fail on Anchorages

Search Good Garages