Mazda MX-3 MOT Results
Registered in 199540.7% pass rate
from 54 tests in 2017
(40% worse than other 1995 cars)
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1995 cars and highlighted areas where the Mazda MX-3 is unusually good or bad.
-
26% fail on
Suspension
-
17% fail on
Prescribed areas
(160% worse than other 1995 cars)
- 17% fail on Component mounting (2 times worse than other 1995 cars)
-
5.6% fail on
Drive shafts
-
5.6% fail on
Front drive shafts
- 5.6% fail on Constant velocity joints
-
5.6% fail on
Front drive shafts
-
3.7% fail on
Shock absorbers
- 3.7% fail on Condition
-
1.9% fail on
Coil springs
- 1.9% fail on Condition
-
1.9% fail on
Suspension arms
- 1.9% fail on Pins/bushes/ball joints
-
1.9% fail on
Trailing arms
- 1.9% fail on Condition
-
1.9% fail on
Anti-roll bars
- 1.9% fail on Linkage condition
-
1.9% fail on
Wheel bearings
- 1.9% fail on Front
- 1.9% fail on Front suspension joints
-
17% fail on
Prescribed areas
(160% worse than other 1995 cars)
-
26% fail on
Brakes
-
15% fail on
Brake performance
- 11% fail on Rear wheels (2 times worse than other 1995 cars)
- 9.3% fail on Front wheels
- 3.7% fail on Service brake performance
- 1.9% fail on Parking brake performance
-
11% fail on
Hydraulic systems
-
11% fail on
Components
- 7.4% fail on Hoses (3 times worse than other 1995 cars)
- 5.6% fail on Pipes
-
11% fail on
Components
-
11% fail on
Hub components
(4 times worse than other 1995 cars)
- 5.6% fail on Brake pads
- 3.7% fail on Brake discs (5 times worse than other 1995 cars)
- 1.9% fail on Brake calipers
- 1.9% fail on ABS
-
15% fail on
Brake performance
-
17% fail on
Tyres
(2 times worse than other 1995 cars)
- 7.4% fail on Tread depth
- 5.6% fail on Condition
- 3.7% fail on Valve stem (43 times worse than other 1995 cars)
-
13% fail on
Lamps, Reflectors and Electrical Equipment
- 7.4% fail on Headlamp aim
- 5.6% fail on Registration plate lamp
-
3.7% fail on
Headlamps
- 3.7% fail on Headlamp
-
1.9% fail on
Headlamp defects which do require an aim check on retest
- 1.9% fail on Main beam 'tell-tale'
-
1.9% fail on
Direction indicators
-
1.9% fail on
Flashing type
- 1.9% fail on Individual lamps
-
1.9% fail on
Flashing type
- 1.9% fail on Headlamp aim not tested
-
13% fail on
Exhaust, Fuel and Emissions
- 7.4% fail on Exhaust system
- 5.6% fail on Emissions
- 1.9% fail on Emissions not tested
-
11% fail on
Driver's view of the road
- 9.3% fail on Wipers
- 1.9% fail on Windscreen
- 1.9% fail on Washers
-
5.6% fail on
Seat Belts and Supplementary Restraint Systems
-
5.6% fail on
Seat belts
- 5.6% fail on Prescribed areas
-
5.6% fail on
Seat belts
-
1.9% fail on
Steering
-
1.9% fail on
Power steering
- 1.9% fail on Other components
-
1.9% fail on
Power steering
-
1.9% fail on
Body, Structure and General Items
-
1.9% fail on
Doors
- 1.9% fail on Drivers
-
1.9% fail on
Doors