Mazda 626 MOT Results

Registered in 1997

67.4% pass rate

from 43 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Mazda 626 is unusually good or bad.

14% fail on Suspension
- 9.3% fail on Component mounting prescribed areas
- 2.3% fail on Suspension rods
  - 2.3% fail on Suspension rod
- 2.3% fail on Anti-roll bars
  - 2.3% fail on Linkage
14% fail on Body, chassis, structure
- 7.0% fail on Transmission
  - 7.0% fail on Drive shafts
    - 7.0% fail on Joints
- 2.3% fail on Integral vehicle structure
  - 2.3% fail on Integral vehicle structure condition
- 2.3% fail on Chassis
  - 2.3% fail on Chassis condition
- 2.3% fail on Exhaust system
9.3% fail on Brakes
- 4.7% fail on Brake performance
  - 2.3% fail on Service Brake Efficiency (sp)
    - 2.3% fail on Rbt (sp)
      - 2.3% fail on Service brake performance
  - 2.3% fail on Parking brake performance
    - 2.3% fail on Rbt
      - 2.3% fail on Parking brake performance
  - 2.3% fail on Parking brake efficiency (sp)
    - 2.3% fail on Rbt (sp)
- 2.3% fail on Rigid brake pipes
- 2.3% fail on Mechanical brake components
  - 2.3% fail on Brake linings and pads
    - 2.3% fail on Brake pads
9.3% fail on Visibility
- 7.0% fail on Wipers
- 2.3% fail on View to rear
  - 2.3% fail on Mirrors
7.0% fail on Seat belts and supplementary restraint systems
- 7.0% fail on Seat belts
  - 7.0% fail on Prescribed areas
4.7% fail on Lamps, reflectors and electrical equipment
- 2.3% fail on Stop lamp
- 2.3% fail on Direction indicators
  - 2.3% fail on Flashing type
    - 2.3% fail on Individual direction indicators
4.7% fail on Noise, emissions and leaks
- 4.7% fail on Exhaust emissions
  - 4.7% fail on Spark ignition
    - 4.7% fail on Catalyst emissions
2.3% fail on Tyres
- 2.3% fail on Condition