Mazda 323 MOT Results

Registered in 1987
52.0% pass rate
from 25 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1987 cars and highlighted areas where the Mazda 323 is unusually good or bad.

  • 24% fail on Body, chassis, structure (2 times worse than other 1987 cars)
    • 12% fail on Transmission (6 times worse than other 1987 cars)
      • 12% fail on Drive shafts (8 times worse than other 1987 cars)
        • 12% fail on Joints (8 times worse than other 1987 cars)
    • 8.0% fail on Integral vehicle structure (6 times worse than other 1987 cars)
      • 8.0% fail on Integral vehicle structure condition (6 times worse than other 1987 cars)
    • 4.0% fail on Body
      • 4.0% fail on Panel
  • 20% fail on Lamps, reflectors and electrical equipment
    • 8.0% fail on Headlamps
      • 8.0% fail on Headlamp
    • 8.0% fail on Front and rear fog lamps
      • 8.0% fail on Rear fog lamp
        • 8.0% fail on Rear fog lamp
    • 4.0% fail on Stop lamp
  • 16% fail on Brakes
    • 12% fail on Brake performance
      • 8.0% fail on Service Brake Efficiency (sp)
        • 8.0% fail on Rbt (sp)
          • 4.0% fail on Service brake performance
          • 4.0% fail on Service brake imbalance
      • 4.0% fail on Service brake performance
        • 4.0% fail on Rbt
          • 4.0% fail on Service brake performance
    • 8.0% fail on Rigid brake pipes
    • 4.0% fail on Mechanical brake components
      • 4.0% fail on Brake linings and pads
        • 4.0% fail on Brake pads
  • 4.0% fail on Suspension
    • 4.0% fail on Component mounting prescribed areas
  • 4.0% fail on Noise, emissions and leaks
    • 4.0% fail on Exhaust emissions
      • 4.0% fail on Spark ignition
        • 4.0% fail on Non catalyst emissions

Search Good Garages