Lancia Delta MOT Results

Registered in 1992
80.0% pass rate
from 125 tests in 2020
(45% better than other 1992 cars)
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Lancia Delta is unusually good or bad.

  • 8.8% fail on Lamps, reflectors and electrical equipment
    • 4.8% fail on Direction indicators
      • 4.8% fail on Flashing type
        • 4.0% fail on Individual direction indicators
        • 1.6% fail on Side repeaters
    • 2.4% fail on Headlamp aim
      • 2.4% fail on Headlamp aim
    • 1.6% fail on Electrical equipment
      • 1.6% fail on Horn
    • 0.80% fail on Headlamps
      • 0.80% fail on Headlamp
  • 4.8% fail on Noise, emissions and leaks
    • 4.8% fail on Exhaust emissions
      • 4.8% fail on Spark ignition
        • 4.0% fail on Catalyst emissions
        • 1.6% fail on Non catalyst emissions
  • 4.0% fail on Brakes (66% better than other 1992 cars)
    • 2.4% fail on Brake performance
      • 1.6% fail on Brake performance not tested
      • 0.80% fail on Parking brake performance
        • 0.80% fail on Decelerometer
          • 0.80% fail on Parking brake performance
      • 0.80% fail on Parking brake efficiency (sp)
        • 0.80% fail on Decelerometer (sp)
    • 0.80% fail on Service brake pedal or hand lever
      • 0.80% fail on Pedal
    • 0.80% fail on Rigid brake pipes
    • 0.80% fail on Flexible brake hoses
    • 0.80% fail on Mechanical brake components
      • 0.80% fail on Brake linings and pads
        • 0.80% fail on Brake pads
  • 3.2% fail on Visibility
    • 3.2% fail on Washers
  • 3.2% fail on Body, chassis, structure (69% better than other 1992 cars)
    • 1.6% fail on Exhaust system
    • 0.80% fail on Integral vehicle structure
      • 0.80% fail on Integral vehicle structure condition
    • 0.80% fail on Chassis
      • 0.80% fail on Chassis condition
  • 2.4% fail on Suspension (78% better than other 1992 cars)
    • 0.80% fail on Wheel bearings
    • 0.80% fail on Suspension arms
      • 0.80% fail on Pins and bushes
    • 0.80% fail on Component mounting prescribed areas
  • 0.80% fail on Identification of the vehicle
    • 0.80% fail on Registration plates
  • 0.80% fail on Steering
    • 0.80% fail on Steering gear
      • 0.80% fail on Steering rack

Search Good Garages