Lancia Delta MOT Results
Registered in 198866.7% pass rate
from 24 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Lancia Delta is unusually good or bad.
-
21% fail on
Brakes
-
21% fail on
Brake performance
-
13% fail on
Parking brake efficiency (sp)
(3 times worse than other 1988 cars)
- 8.3% fail on Decelerometer (sp) (34 times worse than other 1988 cars)
- 4.2% fail on Rbt (sp)
-
8.3% fail on
Service brake performance
-
8.3% fail on
Rbt
- 8.3% fail on Service brake performance
-
8.3% fail on
Rbt
-
8.3% fail on
Service Brake Efficiency (sp)
-
8.3% fail on
Rbt (sp)
- 4.2% fail on Service brake performance
- 4.2% fail on Service brake imbalance
-
8.3% fail on
Rbt (sp)
-
13% fail on
Parking brake efficiency (sp)
(3 times worse than other 1988 cars)
-
4.2% fail on
Air and vacuum systems
- 4.2% fail on Leaks
-
4.2% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
- 4.2% fail on Hydraulic brake callipers
-
21% fail on
Brake performance
-
17% fail on
Lamps, reflectors and electrical equipment
-
17% fail on
Headlamps
(4 times worse than other 1988 cars)
- 13% fail on Headlamp
- 4.2% fail on Dipswitch
- 4.2% fail on Stop lamp
-
4.2% fail on
Direction indicators
-
4.2% fail on
Flashing type
- 4.2% fail on All direction indicators
- 4.2% fail on Side repeaters
-
4.2% fail on
Flashing type
-
4.2% fail on
Hazard warning
- 4.2% fail on Switch
-
4.2% fail on
Front and rear fog lamps
-
4.2% fail on
Rear fog lamp
- 4.2% fail on Rear fog lamp
-
4.2% fail on
Rear fog lamp
-
4.2% fail on
Mandatory tell-tales
- 4.2% fail on Rear fog lamp tell-tale
-
4.2% fail on
Electrical equipment
- 4.2% fail on Battery(ies)
-
17% fail on
Headlamps
(4 times worse than other 1988 cars)
-
8.3% fail on
Visibility
- 8.3% fail on Washers
-
8.3% fail on
Suspension
-
4.2% fail on
Suspension arms
- 4.2% fail on Suspension arm
-
4.2% fail on
Sub-frames
- 4.2% fail on Sub-frame
- 4.2% fail on Component mounting prescribed areas
-
4.2% fail on
Suspension arms
-
4.2% fail on
Steering
- 4.2% fail on Prescribed areas
-
4.2% fail on
Seat belts and supplementary restraint systems
-
4.2% fail on
Seat belts
- 4.2% fail on Prescribed areas
- 4.2% fail on Condition
-
4.2% fail on
Seat belts
-
4.2% fail on
Noise, emissions and leaks
-
4.2% fail on
Exhaust emissions
-
4.2% fail on
Spark ignition
- 4.2% fail on Non catalyst emissions
-
4.2% fail on
Spark ignition
-
4.2% fail on
Exhaust emissions
-
4.2% fail on
Tyres
- 4.2% fail on Condition