Jeep Commander MOT Results

Registered in 2009

66.7% pass rate

from 45 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2009 cars and highlighted areas where the Jeep Commander is unusually good or bad.

13% fail on Brakes
- 4.4% fail on Brake performance
  - 2.2% fail on Service brake performance
    - 2.2% fail on Rbt
      - 2.2% fail on Service brake performance
  - 2.2% fail on Brake performance not tested
  - 2.2% fail on Parking brake efficiency (sp)
    - 2.2% fail on Decelerometer (sp)
- 2.2% fail on Hydraulic systems
  - 2.2% fail on Brake fluid
- 2.2% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 2.2% fail on Hydraulic brake callipers
- 2.2% fail on Mechanical brake components
  - 2.2% fail on Brake linings and pads
    - 2.2% fail on Brake pads
- 2.2% fail on ABS / EBS / ESC
  - 2.2% fail on Anti-lock braking system
11% fail on Lamps, reflectors and electrical equipment
- 4.4% fail on Registration plate lamp(s)
- 2.2% fail on Headlamps
  - 2.2% fail on Headlamp
- 2.2% fail on Headlamp aim
  - 2.2% fail on Headlamp aim
- 2.2% fail on Direction indicators
  - 2.2% fail on Flashing type
    - 2.2% fail on Individual direction indicators
8.9% fail on Visibility
- 4.4% fail on Wipers
- 4.4% fail on Washers
4.4% fail on Suspension
- 2.2% fail on Anti-roll bars
  - 2.2% fail on Linkage ball joints
- 2.2% fail on Other suspension component
  - 2.2% fail on Ball joint
4.4% fail on Seat belts and supplementary restraint systems
- 4.4% fail on SRS malfunction indicator lamp (6 times worse than other 2009 cars)
4.4% fail on Noise, emissions and leaks
- 4.4% fail on Exhaust emissions
  - 2.2% fail on Spark ignition
    - 2.2% fail on Catalyst emissions
  - 2.2% fail on Compression ignition
    - 2.2% fail on Emissions not tested
- 2.2% fail on Fluid leaks
  - 2.2% fail on Transmission oil leaks
2.2% fail on Tyres
- 2.2% fail on Tread depth