Honda CR-X MOT Results
Registered in 199266.0% pass rate
from 162 tests in 2017
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Honda CR-X is unusually good or bad.
-
20% fail on
Lamps, Reflectors and Electrical Equipment
-
8.6% fail on
Rear fog lamp
(100% worse than other 1992 cars)
- 8.6% fail on Fog lamp (120% worse than other 1992 cars)
- 0.62% fail on Tell tale
- 0.62% fail on Switch
-
3.7% fail on
Position lamps
- 2.5% fail on Front lamps
- 1.2% fail on Rear lamps
-
3.7% fail on
Headlamps
- 3.7% fail on Headlamp
- 3.1% fail on Stop lamp
- 3.1% fail on Headlamp aim
- 1.2% fail on Battery
-
1.2% fail on
Direction indicators
-
1.2% fail on
Flashing type
- 0.62% fail on All direction indicators
- 0.62% fail on Individual lamps
-
1.2% fail on
Flashing type
-
1.2% fail on
Hazard warning
- 0.62% fail on Lamp
- 0.62% fail on Switch
- 1.2% fail on Horn
-
8.6% fail on
Rear fog lamp
(100% worse than other 1992 cars)
-
14% fail on
Brakes
-
12% fail on
Brake performance
- 5.6% fail on Front wheels
- 4.3% fail on Service brake performance
- 4.3% fail on Parking brake performance
- 3.1% fail on Rear wheels
-
0.62% fail on
Hydraulic systems
- 0.62% fail on Leaks
- 0.62% fail on ABS
-
12% fail on
Brake performance
-
9.9% fail on
Suspension
-
4.3% fail on
Drive shafts
-
4.3% fail on
Front drive shafts
- 4.3% fail on Constant velocity joints
-
4.3% fail on
Front drive shafts
-
1.9% fail on
Coil springs
- 1.9% fail on Condition
-
1.2% fail on
Suspension arms
- 1.2% fail on Pins/bushes/ball joints
-
1.2% fail on
Trailing arms
- 1.2% fail on Pins/bushes/ball joints
-
1.2% fail on
Anti-roll bars
- 0.62% fail on Pins/bushes/ball joints
- 0.62% fail on Linkage condition
-
1.2% fail on
Wheel bearings
- 1.2% fail on Rear
-
1.2% fail on
Prescribed areas
(79% better than other 1992 cars)
- 1.2% fail on Component mounting
-
0.62% fail on
Radius arms
- 0.62% fail on Pins/bushes/ball joints
-
4.3% fail on
Drive shafts
-
8.6% fail on
Exhaust, Fuel and Emissions
- 5.6% fail on Emissions
- 4.3% fail on Exhaust system
-
0.62% fail on
Fuel system
- 0.62% fail on Cap
- 0.62% fail on Emissions not tested
-
6.2% fail on
Steering
-
5.6% fail on
Steering system
- 3.7% fail on Steering rack
- 1.9% fail on Track rod end
- 0.62% fail on Steering operation
-
5.6% fail on
Steering system
-
5.6% fail on
Driver's view of the road
- 3.1% fail on Wipers
- 1.2% fail on Windscreen
- 1.2% fail on Washers
-
4.3% fail on
Tyres
- 3.1% fail on Condition
- 1.2% fail on Tread depth
-
2.5% fail on
Body, Structure and General Items
- 0.62% fail on Body security
- 0.62% fail on Body condition
-
0.62% fail on
Doors
- 0.62% fail on Passengers front
-
0.62% fail on
Seats
- 0.62% fail on Drivers
-
1.2% fail on
Road Wheels
- 1.2% fail on Attachment
-
1.2% fail on
Seat Belts and Supplementary Restraint Systems
-
1.2% fail on
Seat belts
- 1.2% fail on Prescribed areas
-
1.2% fail on
Seat belts
-
0.62% fail on
Registration plates and VIN
- 0.62% fail on Registration plate