FIAT Panda MOT Results
Registered in 198965.3% pass rate
from 49 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1989 cars and highlighted areas where the FIAT Panda is unusually good or bad.
-
16% fail on
Lamps, reflectors and electrical equipment
-
6.1% fail on
Headlamps
- 6.1% fail on Headlamp
-
4.1% fail on
Headlamp aim
- 4.1% fail on Headlamp aim
- 2.0% fail on Stop lamp
-
2.0% fail on
Direction indicators
-
2.0% fail on
Flashing type
- 2.0% fail on Individual direction indicators
-
2.0% fail on
Flashing type
-
2.0% fail on
Hazard warning
- 2.0% fail on Switch
-
2.0% fail on
Mandatory tell-tales
- 2.0% fail on Main beam tell-tale
- 2.0% fail on Rear fog lamp tell-tale
-
2.0% fail on
Electrical equipment
- 2.0% fail on Horn
-
6.1% fail on
Headlamps
-
14% fail on
Visibility
- 12% fail on Wipers (3 times worse than other 1989 cars)
- 2.0% fail on Washers
-
12% fail on
Body, chassis, structure
-
6.1% fail on
Fuel system
(5 times worse than other 1989 cars)
- 4.1% fail on Pipe (9 times worse than other 1989 cars)
- 2.0% fail on Tank
-
4.1% fail on
Chassis
- 4.1% fail on Chassis condition
- 4.1% fail on Exhaust system
-
2.0% fail on
Integral vehicle structure
- 2.0% fail on Integral vehicle structure condition
-
2.0% fail on
Seats
- 2.0% fail on Driver's seat
- 2.0% fail on Passenger's seat
-
2.0% fail on
Boot lid
- 2.0% fail on Boot lid condition
-
6.1% fail on
Fuel system
(5 times worse than other 1989 cars)
-
10% fail on
Brakes
-
10% fail on
Brake performance
-
6.1% fail on
Service Brake Efficiency (sp)
-
6.1% fail on
Rbt (sp)
- 6.1% fail on Service brake imbalance
- 4.1% fail on Service brake performance
-
6.1% fail on
Rbt (sp)
-
4.1% fail on
Service brake performance
-
4.1% fail on
Rbt
- 4.1% fail on Service brake performance
-
4.1% fail on
Rbt
-
2.0% fail on
Parking brake efficiency (sp)
- 2.0% fail on Rbt (sp)
-
6.1% fail on
Service Brake Efficiency (sp)
- 2.0% fail on Rigid brake pipes
-
2.0% fail on
Other components and prescribed areas
- 2.0% fail on Other components
-
10% fail on
Brake performance
-
10% fail on
Suspension
- 8.2% fail on Component mounting prescribed areas
-
2.0% fail on
Suspension arms
- 2.0% fail on Ball joint dust cover
-
6.1% fail on
Seat belts and supplementary restraint systems
-
6.1% fail on
Seat belts
- 4.1% fail on Prescribed areas
- 2.0% fail on Condition
-
6.1% fail on
Seat belts
-
4.1% fail on
Noise, emissions and leaks
-
4.1% fail on
Exhaust emissions
-
4.1% fail on
Spark ignition
- 2.0% fail on Non catalyst emissions
- 2.0% fail on Emissions not tested
-
4.1% fail on
Spark ignition
-
4.1% fail on
Exhaust emissions
-
2.0% fail on
Steering
-
2.0% fail on
Steering linkage components
- 2.0% fail on Track rod end
-
2.0% fail on
Steering linkage components
-
2.0% fail on
Tyres
- 2.0% fail on Size/type