MOT Results

Honest John Good Garage Guide MOT Results » FIAT » Panda » 1988

FIAT Panda MOT Results

Registered in 1988
57.9% pass rate
from 38 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the FIAT Panda is unusually good or bad.

  • 21% fail on Visibility (200% worse than other 1988 cars)
    • 11% fail on Wipers (2 times worse than other 1988 cars)
    • 11% fail on Washers
    • 2.6% fail on Condition of glass
      • 2.6% fail on Windscreen
  • 21% fail on Lamps, reflectors and electrical equipment
    • 5.3% fail on Headlamps
      • 5.3% fail on Headlamp
    • 5.3% fail on Stop lamp
    • 5.3% fail on Front and rear fog lamps
      • 5.3% fail on Rear fog lamp
        • 5.3% fail on Rear fog lamp
    • 2.6% fail on Headlamp aim
      • 2.6% fail on Headlamp aim
    • 2.6% fail on Direction indicators
      • 2.6% fail on Flashing type
        • 2.6% fail on Individual direction indicators
    • 2.6% fail on Mandatory tell-tales
      • 2.6% fail on Rear fog lamp tell-tale
    • 2.6% fail on Electrical equipment
      • 2.6% fail on Horn
  • 18% fail on Body, chassis, structure
    • 5.3% fail on Transmission
      • 5.3% fail on Drive shafts
        • 5.3% fail on Joints
    • 2.6% fail on Integral vehicle structure
      • 2.6% fail on Integral vehicle structure condition
    • 2.6% fail on Chassis
      • 2.6% fail on Chassis condition
    • 2.6% fail on Exhaust system
    • 2.6% fail on Body
      • 2.6% fail on Panel
    • 2.6% fail on Floor
  • 13% fail on Suspension
    • 11% fail on Component mounting prescribed areas
    • 5.3% fail on Springs (7 times worse than other 1988 cars)
      • 2.6% fail on Leaf springs
        • 2.6% fail on Leaf spring
      • 2.6% fail on Spring mounting prescribed areas
  • 11% fail on Noise, emissions and leaks
    • 11% fail on Exhaust emissions
      • 11% fail on Spark ignition
        • 11% fail on Non catalyst emissions
  • 5.3% fail on Steering
    • 5.3% fail on Steering linkage components
      • 5.3% fail on Track rod end
  • 2.6% fail on Brakes
    • 2.6% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 2.6% fail on Hydraulic brake callipers
  • 2.6% fail on Seat belts and supplementary restraint systems
    • 2.6% fail on Seat belts
      • 2.6% fail on Prescribed areas

Search Good Garages