MOT Results

Honest John Good Garage Guide MOT Results » FIAT » Coupe » 1995

FIAT Coupe MOT Results

Registered in 1995
64.3% pass rate
from 28 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1995 cars and highlighted areas where the FIAT Coupe is unusually good or bad.

  • 21% fail on Lamps, reflectors and electrical equipment
    • 14% fail on Direction indicators (4 times worse than other 1995 cars)
      • 14% fail on Flashing type (4 times worse than other 1995 cars)
        • 7.1% fail on Side repeaters (6 times worse than other 1995 cars)
        • 3.6% fail on All direction indicators
        • 3.6% fail on Individual direction indicators
    • 7.1% fail on Headlamps
      • 3.6% fail on Headlamp
      • 3.6% fail on Headlamp levelling device
    • 7.1% fail on Headlamp aim
      • 7.1% fail on Headlamp aim
    • 3.6% fail on Stop lamp
    • 3.6% fail on Hazard warning
      • 3.6% fail on Switch
  • 21% fail on Noise, emissions and leaks (180% worse than other 1995 cars)
    • 21% fail on Exhaust emissions (2 times worse than other 1995 cars)
      • 21% fail on Spark ignition (2 times worse than other 1995 cars)
        • 18% fail on Catalyst emissions (2 times worse than other 1995 cars)
        • 3.6% fail on Emissions not tested
  • 14% fail on Brakes
    • 14% fail on Brake performance
      • 7.1% fail on Service Brake Efficiency (sp)
        • 7.1% fail on Rbt (sp)
          • 7.1% fail on Service brake imbalance
      • 7.1% fail on Parking brake efficiency (sp)
        • 7.1% fail on Rbt (sp)
      • 3.6% fail on Brake performance not tested
      • 3.6% fail on Parking brake performance
        • 3.6% fail on Rbt
          • 3.6% fail on Parking brake performance
    • 3.6% fail on Mechanical brake components
      • 3.6% fail on Brake linings and pads
        • 3.6% fail on Brake pads
  • 11% fail on Suspension
    • 7.1% fail on Suspension arms
      • 3.6% fail on Suspension arm
      • 3.6% fail on Pins and bushes
    • 7.1% fail on Component mounting prescribed areas
    • 3.6% fail on Wheel bearings
  • 7.1% fail on Body, chassis, structure
    • 3.6% fail on Chassis
      • 3.6% fail on Chassis condition
    • 3.6% fail on Exhaust system
  • 7.1% fail on Seat belts and supplementary restraint systems
    • 3.6% fail on Seat belts
      • 3.6% fail on Prescribed areas
    • 3.6% fail on SRS malfunction indicator lamp
  • 3.6% fail on Visibility
    • 3.6% fail on Wipers

Search Good Garages