How do I replace the timing belt on my Peugeot TUD5?

I need to replace a timing belt on my Peugeot TUD5 and have a few questions. When the timing belt broke would it be possible that the valves got bent at the same time the belt broke? Is there some diagram or picture that will show what has to be lined up to be timed right?

Asked on 14 July 2010 by Evergreen Memorial

Answered by Alan Ross

Yes there is a chance that when the belt broke it may have caused damage to the engine (valves etc). When the belt broke was the engine revving hard? If so, the risk would be greater. To set the timing up correctly you will have to refer to a workshop manual, or ask your local garage if they can tell you. You must ensure that you replace the belt in the correct position, otherwise you may cause additional damage.

Tags: technical issues timing belt engine problem

Similar questions

Are people fitting older engines to the Ford Galaxy to avoid timing belt problems?

i am thinking of buying a used new shape Ford Galaxy but I have heard that there is a problem with one of the diesel engines. I think it is the 1.8 TDCI which has a timing belt instead of a chain. I am...

Could my Renault Megane's valves have hit the pistons if the timing belt has slipped?

My 2001 Renault Megane (69,851 miles) has lost compression. It appears the timing belt has not snapped but has possibly lost teeth. I have been led to believe that the repair could exceed £1000. Does the...

Why will my Citroen Xsara not rev properly?

Do you have any advice as to why my Citroen Xsara 1.4 petrol won’t rev properly? I’ve changed the throttle body and added fuel treatment. It runs and drives but it just won’t give a full rev as if it’s...