Toyota Urban Cruiser MOT Results

Registered in 2012
78.7% pass rate
from 606 tests in 2021
(30% better than other 2012 cars)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Toyota Urban Cruiser is unusually good or bad.

  • 8.6% fail on Brakes (44% worse than other 2012 cars)
    • 3.6% fail on Brake performance
      • 1.3% fail on Service Brake Efficiency (sp) (2 times worse than other 2012 cars)
        • 1.3% fail on Rbt (sp) (2 times worse than other 2012 cars)
          • 0.99% fail on Service brake imbalance (2 times worse than other 2012 cars)
          • 0.50% fail on Service brake performance
      • 1.2% fail on Parking brake efficiency (sp)
        • 0.99% fail on Rbt (sp)
        • 0.17% fail on Decelerometer (sp)
      • 0.99% fail on Service brake performance
        • 0.99% fail on Rbt
          • 0.99% fail on Service brake performance
      • 0.83% fail on Brake performance not tested (7 times worse than other 2012 cars)
    • 3.0% fail on Rigid brake pipes (5 times worse than other 2012 cars)
    • 2.5% fail on Mechanical brake components
      • 2.1% fail on Brake discs and drums (120% worse than other 2012 cars)
        • 2.1% fail on Brake discs (120% worse than other 2012 cars)
      • 0.83% fail on Brake linings and pads
        • 0.83% fail on Brake pads
    • 0.99% fail on ABS / EBS / ESC (200% worse than other 2012 cars)
      • 0.83% fail on Electronic stability control (3 times worse than other 2012 cars)
      • 0.17% fail on Anti-lock braking system
    • 0.66% fail on Service brake pedal or hand lever
      • 0.50% fail on Hand lever
      • 0.17% fail on Pedal
  • 4.8% fail on Visibility
    • 3.3% fail on Wipers
    • 1.8% fail on Washers
  • 4.1% fail on Lamps, reflectors and electrical equipment (55% better than other 2012 cars)
    • 1.7% fail on Headlamp aim
      • 1.7% fail on Headlamp aim
    • 1.2% fail on Headlamps
      • 1.2% fail on Headlamp
      • 0.17% fail on Headlamp cleaning device
    • 0.66% fail on Rear reflectors (12 times worse than other 2012 cars)
    • 0.33% fail on Registration plate lamp(s)
    • 0.17% fail on Position lamps
      • 0.17% fail on Position lamp
    • 0.17% fail on Stop lamp
  • 4.1% fail on Suspension (56% better than other 2012 cars)
    • 1.8% fail on Suspension arms
      • 1.5% fail on Pins and bushes
      • 0.33% fail on Ball joint (79% better than other 2012 cars)
    • 1.3% fail on Anti-roll bars
      • 0.66% fail on Linkage ball joint dust cover
      • 0.33% fail on Ball joint dust cover
      • 0.17% fail on Linkage pins and bushes
      • 0.17% fail on Linkage ball joints
    • 0.50% fail on Wheel bearings
    • 0.50% fail on Springs (89% better than other 2012 cars)
      • 0.50% fail on Coil springs (89% better than other 2012 cars)
        • 0.50% fail on Coil spring (89% better than other 2012 cars)
    • 0.17% fail on Shock absorbers
  • 3.0% fail on Tyres (46% better than other 2012 cars)
    • 1.8% fail on Tread depth
    • 1.3% fail on Condition
    • 0.17% fail on Size/type
  • 1.3% fail on Noise, emissions and leaks
    • 1.3% fail on Exhaust emissions
      • 1.3% fail on Compression ignition
        • 0.99% fail on Malfunction indicator lamp
        • 0.17% fail on On or after 01/07/2008
        • 0.17% fail on Emissions not tested
  • 0.83% fail on Identification of the vehicle
    • 0.83% fail on Registration plates
  • 0.66% fail on Body, chassis, structure (74% better than other 2012 cars)
    • 0.17% fail on Exhaust system
    • 0.17% fail on Fuel system
      • 0.17% fail on Pipe
    • 0.17% fail on Bumpers
    • 0.17% fail on Transmission
      • 0.17% fail on Drive shafts
        • 0.17% fail on Joints
  • 0.33% fail on Road Wheels
    • 0.33% fail on Attachment
  • 0.17% fail on Seat belts and supplementary restraint systems
    • 0.17% fail on SRS malfunction indicator lamp

Search Good Garages