Toyota Previa MOT Results

Registered in 1992
55.0% pass rate
from 40 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Toyota Previa is unusually good or bad.

  • 28% fail on Brakes (150% worse than other 1992 cars)
    • 20% fail on Brake performance (150% worse than other 1992 cars)
      • 7.5% fail on Service brake performance
        • 7.5% fail on Rbt
          • 7.5% fail on Service brake performance
      • 7.5% fail on Service Brake Efficiency (sp)
        • 7.5% fail on Rbt (sp)
          • 5.0% fail on Service brake performance
          • 5.0% fail on Service brake imbalance
      • 2.5% fail on Brake performance not tested
      • 2.5% fail on Parking brake performance
        • 2.5% fail on Rbt
          • 2.5% fail on Parking brake performance
      • 2.5% fail on Parking brake efficiency (sp)
        • 2.5% fail on Rbt (sp)
    • 13% fail on Rigid brake pipes (5 times worse than other 1992 cars)
    • 5.0% fail on Hydraulic systems (15 times worse than other 1992 cars)
      • 2.5% fail on Brake fluid
      • 2.5% fail on Valves
    • 5.0% fail on Mechanical brake components
      • 2.5% fail on Brake linings and pads
        • 2.5% fail on Brake pads
      • 2.5% fail on Brake discs and drums
        • 2.5% fail on Brake discs
    • 2.5% fail on Flexible brake hoses
    • 2.5% fail on Load sensing valves
  • 13% fail on Lamps, reflectors and electrical equipment
    • 2.5% fail on Headlamps
      • 2.5% fail on Headlamp
    • 2.5% fail on Headlamp aim
      • 2.5% fail on Headlamp aim
    • 2.5% fail on Stop lamp
    • 2.5% fail on Direction indicators
      • 2.5% fail on Flashing type
        • 2.5% fail on Individual direction indicators
    • 2.5% fail on Front and rear fog lamps
      • 2.5% fail on Rear fog lamp
        • 2.5% fail on Rear fog lamp
    • 2.5% fail on Registration plate lamp(s)
  • 13% fail on Suspension
    • 5.0% fail on Component mounting prescribed areas
    • 2.5% fail on Wheel bearings
    • 2.5% fail on Shock absorbers
    • 2.5% fail on Suspension arms
      • 2.5% fail on Ball joint
  • 13% fail on Body, chassis, structure
    • 7.5% fail on Exhaust system
    • 5.0% fail on Integral vehicle structure
      • 5.0% fail on Integral vehicle structure condition
    • 2.5% fail on Fuel system
      • 2.5% fail on System
    • 2.5% fail on Bumpers
    • 2.5% fail on Body
      • 2.5% fail on Panel
  • 10% fail on Noise, emissions and leaks
    • 10% fail on Exhaust emissions
      • 7.5% fail on Spark ignition
        • 2.5% fail on Non catalyst emissions
        • 2.5% fail on Catalyst emissions
        • 2.5% fail on Emissions not tested
      • 2.5% fail on Compression ignition
        • 2.5% fail on Emissions not tested
    • 2.5% fail on Fluid leaks
      • 2.5% fail on Engine oil leaks
  • 7.5% fail on Visibility
    • 7.5% fail on Wipers
    • 2.5% fail on Washers
  • 2.5% fail on Steering
    • 2.5% fail on Power steering
      • 2.5% fail on Pipes and hoses
  • 2.5% fail on Speedometer and speed limiter
    • 2.5% fail on Speedometer
  • 2.5% fail on Seat belts and supplementary restraint systems
    • 2.5% fail on Seat belts
      • 2.5% fail on Prescribed areas

Search Good Garages