MOT Results

Honest John Good Garage Guide MOT Results » Toyota » Picnic » 1997

Toyota Picnic MOT Results

Registered in 1997
58.3% pass rate
from 120 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Toyota Picnic is unusually good or bad.

  • 18% fail on Noise, emissions and leaks (120% worse than other 1997 cars)
    • 18% fail on Exhaust emissions (140% worse than other 1997 cars)
      • 18% fail on Spark ignition (150% worse than other 1997 cars)
        • 14% fail on Catalyst emissions (160% worse than other 1997 cars)
        • 2.5% fail on Emissions not tested
        • 0.83% fail on Non catalyst emissions
        • 0.83% fail on Malfunction indicator lamp
  • 17% fail on Body, chassis, structure
    • 9.2% fail on Exhaust system (200% worse than other 1997 cars)
    • 5.8% fail on Transmission
      • 5.8% fail on Drive shafts
        • 5.8% fail on Joints
    • 0.83% fail on Integral vehicle structure
      • 0.83% fail on Integral vehicle structure condition
    • 0.83% fail on Chassis
      • 0.83% fail on Chassis condition
    • 0.83% fail on Fuel system
      • 0.83% fail on Pipe
    • 0.83% fail on Bumpers
    • 0.83% fail on Cabs
      • 0.83% fail on Prescribed areas
  • 14% fail on Lamps, reflectors and electrical equipment
    • 5.0% fail on Stop lamp
    • 4.2% fail on Headlamps
      • 4.2% fail on Headlamp
    • 2.5% fail on Headlamp aim
      • 2.5% fail on Headlamp aim
      • 0.83% fail on Headlamp aim not tested
    • 1.7% fail on Front and rear fog lamps
      • 1.7% fail on Rear fog lamp
        • 1.7% fail on Rear fog lamp
    • 0.83% fail on Direction indicators
      • 0.83% fail on Flashing type
        • 0.83% fail on Individual direction indicators
    • 0.83% fail on Registration plate lamp(s)
    • 0.83% fail on Electrical equipment
      • 0.83% fail on Horn
  • 11% fail on Suspension
    • 8.3% fail on Component mounting prescribed areas
    • 2.5% fail on Suspension arms
      • 1.7% fail on Pins and bushes
      • 0.83% fail on Attachment bracket and mounting
    • 0.83% fail on Axles
      • 0.83% fail on Swivel pins and bushes
    • 0.83% fail on Anti-roll bars
      • 0.83% fail on Linkage ball joints
  • 5.8% fail on Brakes
    • 5.8% fail on Brake performance
      • 4.2% fail on Service brake performance
        • 4.2% fail on Rbt
          • 3.3% fail on Service brake performance
          • 1.7% fail on Service brake imbalance
      • 1.7% fail on Service Brake Efficiency (sp)
        • 1.7% fail on Rbt (sp)
          • 1.7% fail on Service brake imbalance
          • 0.83% fail on Service brake performance
      • 0.83% fail on Brake performance not tested
    • 0.83% fail on Rigid brake pipes
  • 5.8% fail on Visibility
    • 4.2% fail on Wipers
    • 1.7% fail on Washers
  • 5.8% fail on Tyres
    • 3.3% fail on Condition
    • 2.5% fail on Tread depth
  • 3.3% fail on Seat belts and supplementary restraint systems
    • 3.3% fail on Seat belts
      • 3.3% fail on Prescribed areas
  • 1.7% fail on Steering
    • 0.83% fail on Steering linkage components
      • 0.83% fail on Locking devices
    • 0.83% fail on Steering column
  • 0.83% fail on Identification of the vehicle
    • 0.83% fail on Registration plates
  • 0.83% fail on Road Wheels
    • 0.83% fail on Attachment

Search Good Garages