Toyota Land Cruiser Colorado MOT Results

Registered in 2000

61.7% pass rate

from 107 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Toyota Land Cruiser Colorado is unusually good or bad.

14% fail on Brakes
- 10% fail on Brake performance
  - 7.5% fail on Parking brake efficiency (sp)
    - 7.5% fail on Rbt (sp)
  - 3.7% fail on Parking brake performance
    - 3.7% fail on Rbt
      - 3.7% fail on Parking brake performance
  - 1.9% fail on Service brake performance
    - 1.9% fail on Rbt
      - 0.93% fail on Service brake performance
      - 0.93% fail on Service brake imbalance
  - 0.93% fail on Service Brake Efficiency (sp)
    - 0.93% fail on Rbt (sp)
      - 0.93% fail on Service brake imbalance
- 2.8% fail on Rigid brake pipes
- 2.8% fail on Mechanical brake components
  - 2.8% fail on Brake discs and drums
    - 2.8% fail on Brake discs
  - 1.9% fail on Brake linings and pads
    - 1.9% fail on Brake pads
- 1.9% fail on ABS / EBS / ESC
  - 1.9% fail on Anti-lock braking system
- 0.93% fail on Pressure storage reservoirs
  - 0.93% fail on Full power hydraulic systems
- 0.93% fail on Hydraulic systems
  - 0.93% fail on Brake fluid
- 0.93% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 0.93% fail on Hydraulic brake callipers
14% fail on Lamps, reflectors and electrical equipment
- 4.7% fail on Headlamps
  - 3.7% fail on Headlamp
  - 0.93% fail on Headlamp levelling device
- 3.7% fail on Front and rear fog lamps
  - 3.7% fail on Rear fog lamp
    - 3.7% fail on Rear fog lamp
- 2.8% fail on Direction indicators
  - 2.8% fail on Flashing type
    - 2.8% fail on Individual direction indicators
- 2.8% fail on Electrical equipment
  - 1.9% fail on Battery(ies)
  - 0.93% fail on Trailer electrical socket
  - 0.93% fail on Electrical wiring
- 0.93% fail on Headlamp aim
  - 0.93% fail on Headlamp aim
- 0.93% fail on Stop lamp
12% fail on Suspension
- 4.7% fail on Anti-roll bars
  - 1.9% fail on Linkage ball joints
  - 0.93% fail on Pins and bushes
  - 0.93% fail on Linkage
  - 0.93% fail on Ball joint dust cover
- 4.7% fail on Component mounting prescribed areas
- 3.7% fail on Suspension arms
  - 2.8% fail on Pins and bushes
  - 0.93% fail on Suspension arm
  - 0.93% fail on Ball joint dust cover
- 0.93% fail on Axles
  - 0.93% fail on Axle
- 0.93% fail on Shock absorbers
8.4% fail on Body, chassis, structure
- 3.7% fail on Chassis
  - 3.7% fail on Chassis condition
- 2.8% fail on Exhaust system
- 1.9% fail on Integral vehicle structure
  - 1.9% fail on Integral vehicle structure condition
- 1.9% fail on Fuel system
  - 0.93% fail on Hose
  - 0.93% fail on Fuel cap/sealing device
4.7% fail on Visibility
- 1.9% fail on Bonnet (11 times worse than other 2000 cars)
- 1.9% fail on Wipers
- 0.93% fail on Washers
2.8% fail on Identification of the vehicle
- 2.8% fail on Registration plates
2.8% fail on Steering
- 1.9% fail on Steering gear
  - 1.9% fail on Steering rack
- 0.93% fail on Steering linkage components
  - 0.93% fail on Track rod end
2.8% fail on Seat belts and supplementary restraint systems
- 2.8% fail on Seat belts
  - 1.9% fail on Prescribed areas
  - 0.93% fail on Condition
1.9% fail on Tyres
- 0.93% fail on Condition
- 0.93% fail on Tread depth
0.93% fail on Noise, emissions and leaks
- 0.93% fail on Exhaust emissions
  - 0.93% fail on Compression ignition
    - 0.93% fail on Emissions not tested
0.93% fail on Road Wheels
- 0.93% fail on Attachment