SAAB 900 MOT Results

Registered in 1994
59.3% pass rate
from 81 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1994 cars and highlighted areas where the SAAB 900 is unusually good or bad.

  • 17% fail on Brakes
    • 14% fail on Brake performance
      • 7.4% fail on Parking brake efficiency (sp)
        • 7.4% fail on Rbt (sp) (2 times worse than other 1994 cars)
      • 3.7% fail on Service Brake Efficiency (sp)
        • 3.7% fail on Rbt (sp)
          • 3.7% fail on Service brake imbalance
          • 1.2% fail on Service brake performance
      • 1.2% fail on Service brake performance
        • 1.2% fail on Rbt
          • 1.2% fail on Service brake performance
      • 1.2% fail on Brake performance not tested
      • 1.2% fail on Parking brake performance
        • 1.2% fail on Rbt
          • 1.2% fail on Parking brake performance
    • 4.9% fail on Rigid brake pipes
    • 2.5% fail on Mechanical brake components
      • 2.5% fail on Brake linings and pads
        • 2.5% fail on Brake pads
    • 1.2% fail on Flexible brake hoses
    • 1.2% fail on ABS / EBS / ESC
      • 1.2% fail on Anti-lock braking system
  • 12% fail on Lamps, reflectors and electrical equipment
    • 2.5% fail on Headlamps
      • 2.5% fail on Headlamp
    • 2.5% fail on Headlamp aim
      • 2.5% fail on Headlamp aim
    • 2.5% fail on Stop lamp
    • 2.5% fail on Direction indicators
      • 2.5% fail on Flashing type
        • 2.5% fail on Side repeaters
    • 2.5% fail on Electrical equipment
      • 1.2% fail on Battery(ies)
      • 1.2% fail on Horn
    • 1.2% fail on Front and rear fog lamps
      • 1.2% fail on Rear fog lamp
        • 1.2% fail on Rear fog lamp
  • 9.9% fail on Noise, emissions and leaks
    • 9.9% fail on Exhaust emissions
      • 9.9% fail on Spark ignition
        • 7.4% fail on Catalyst emissions
        • 1.2% fail on Malfunction indicator lamp
        • 1.2% fail on Emissions not tested
  • 8.6% fail on Suspension
    • 6.2% fail on Suspension arms
      • 2.5% fail on Pins and bushes
      • 2.5% fail on Ball joint dust cover
      • 1.2% fail on Suspension arm
    • 2.5% fail on Springs
      • 1.2% fail on Coil springs
        • 1.2% fail on Coil spring
      • 1.2% fail on Spring mounting prescribed areas
    • 2.5% fail on Component mounting prescribed areas
  • 7.4% fail on Visibility
    • 6.2% fail on Wipers
    • 3.7% fail on Washers
    • 1.2% fail on Condition of glass
      • 1.2% fail on Windscreen
  • 7.4% fail on Body, chassis, structure
    • 4.9% fail on Transmission
      • 3.7% fail on Drive shafts
        • 3.7% fail on Joints
      • 1.2% fail on Prop shafts
        • 1.2% fail on Joints
    • 2.5% fail on Chassis
      • 2.5% fail on Chassis condition
    • 1.2% fail on Exhaust system
  • 2.5% fail on Seat belts and supplementary restraint systems
    • 2.5% fail on Seat belts
      • 2.5% fail on Prescribed areas
  • 2.5% fail on Tyres
    • 2.5% fail on Tread depth
  • 1.2% fail on Identification of the vehicle
    • 1.2% fail on Registration plates
  • 1.2% fail on Steering
    • 1.2% fail on Steering gear
      • 1.2% fail on Steering rack
    • 1.2% fail on Steering linkage components
      • 1.2% fail on Track rod end

Search Good Garages