Rover 400 MOT Results

Registered in 1991
61.5% pass rate
from 26 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1991 cars and highlighted areas where the Rover 400 is unusually good or bad.

  • 15% fail on Body, chassis, structure
    • 7.7% fail on Exhaust system
    • 3.8% fail on Integral vehicle structure
      • 3.8% fail on Integral vehicle structure condition
    • 3.8% fail on Transmission
      • 3.8% fail on Drive shafts
        • 3.8% fail on Joints
    • 3.8% fail on Engine mounting
      • 3.8% fail on Bracket
  • 12% fail on Brakes
    • 7.7% fail on Brake performance
      • 7.7% fail on Service Brake Efficiency (sp)
        • 7.7% fail on Rbt (sp)
          • 7.7% fail on Service brake performance
          • 3.8% fail on Service brake imbalance
      • 3.8% fail on Service brake performance
        • 3.8% fail on Rbt
          • 3.8% fail on Service brake performance
    • 3.8% fail on Hydraulic systems
      • 3.8% fail on Valves
  • 12% fail on Suspension
    • 12% fail on Component mounting prescribed areas
    • 3.8% fail on Anti-roll bars
      • 3.8% fail on Linkage pins and bushes
    • 3.8% fail on Sub-frames
      • 3.8% fail on Sub-frame
  • 7.7% fail on Visibility
    • 7.7% fail on Washers
  • 7.7% fail on Seat belts and supplementary restraint systems
    • 7.7% fail on Seat belts
      • 7.7% fail on Prescribed areas
  • 7.7% fail on Noise, emissions and leaks
    • 7.7% fail on Exhaust emissions
      • 7.7% fail on Spark ignition
        • 7.7% fail on Non catalyst emissions
  • 3.8% fail on Identification of the vehicle
    • 3.8% fail on Registration plates
  • 3.8% fail on Steering
    • 3.8% fail on Steering gear
      • 3.8% fail on Steering rack
  • 3.8% fail on Lamps, reflectors and electrical equipment
    • 3.8% fail on Headlamps
      • 3.8% fail on Headlamp

Search Good Garages