Peugeot 806 MOT Results
Registered in 199751.9% pass rate
from 27 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Peugeot 806 is unusually good or bad.
-
26% fail on
Suspension
-
19% fail on
Suspension arms
(4 times worse than other 1997 cars)
- 11% fail on Ball joint dust cover (14 times worse than other 1997 cars)
- 3.7% fail on Attachment bracket and mounting
- 3.7% fail on Pins and bushes
- 7.4% fail on Component mounting prescribed areas
-
3.7% fail on
Sub-frames
- 3.7% fail on Sub-frame
-
3.7% fail on
Other suspension component
- 3.7% fail on Ball joint dust cover
-
19% fail on
Suspension arms
(4 times worse than other 1997 cars)
-
19% fail on
Visibility
- 19% fail on Wipers (4 times worse than other 1997 cars)
- 11% fail on Washers
-
3.7% fail on
View to rear
- 3.7% fail on Mirrors
-
15% fail on
Noise, emissions and leaks
-
11% fail on
Exhaust emissions
-
7.4% fail on
Compression ignition
(12 times worse than other 1997 cars)
- 7.4% fail on Pre 01/07/2008 Turbo (33 times worse than other 1997 cars)
-
3.7% fail on
Spark ignition
- 3.7% fail on Emissions not tested
-
7.4% fail on
Compression ignition
(12 times worse than other 1997 cars)
-
3.7% fail on
Fluid leaks
- 3.7% fail on Engine oil leaks
-
11% fail on
Exhaust emissions
-
15% fail on
Tyres
(3 times worse than other 1997 cars)
- 11% fail on Tread depth (5 times worse than other 1997 cars)
- 3.7% fail on Condition
-
11% fail on
Brakes
-
11% fail on
Brake performance
-
7.4% fail on
Service Brake Efficiency (sp)
-
7.4% fail on
Rbt (sp)
- 7.4% fail on Service brake imbalance
- 3.7% fail on Service brake performance
-
7.4% fail on
Rbt (sp)
-
3.7% fail on
Service brake performance
-
3.7% fail on
Rbt
- 3.7% fail on Service brake performance
-
3.7% fail on
Rbt
-
3.7% fail on
Parking brake efficiency (sp)
- 3.7% fail on Rbt (sp)
-
7.4% fail on
Service Brake Efficiency (sp)
- 3.7% fail on Load sensing valves
-
11% fail on
Brake performance
-
11% fail on
Lamps, reflectors and electrical equipment
-
11% fail on
Headlamps
- 11% fail on Headlamp (3 times worse than other 1997 cars)
-
3.7% fail on
Headlamp aim
- 3.7% fail on Headlamp aim not tested
-
3.7% fail on
Electrical equipment
- 3.7% fail on Horn
-
11% fail on
Headlamps
-
11% fail on
Body, chassis, structure
-
11% fail on
Transmission
-
11% fail on
Drive shafts
(3 times worse than other 1997 cars)
- 11% fail on Joints (3 times worse than other 1997 cars)
-
11% fail on
Drive shafts
(3 times worse than other 1997 cars)
- 3.7% fail on Exhaust system
-
11% fail on
Transmission
-
7.4% fail on
Identification of the vehicle
(7 times worse than other 1997 cars)
- 7.4% fail on Registration plates (7 times worse than other 1997 cars)
-
3.7% fail on
Steering
-
3.7% fail on
Steering linkage components
- 3.7% fail on Track rod end
-
3.7% fail on
Steering linkage components
-
3.7% fail on
Seat belts and supplementary restraint systems
- 3.7% fail on SRS malfunction indicator lamp