Peugeot 2008 MOT Results

Registered in 2013
68.2% pass rate
from 3,516 tests in 2021
(23% worse than other 2013 cars)
Pass rate by mileage
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2013 cars and highlighted areas where the Peugeot 2008 is unusually good or bad.

  • 14% fail on Body, chassis, structure (6 times worse than other 2013 cars)
    • 11% fail on Transmission (12 times worse than other 2013 cars)
      • 11% fail on Drive shafts (13 times worse than other 2013 cars)
        • 11% fail on Joints (13 times worse than other 2013 cars)
        • 0.028% fail on Drive shaft
      • 0.11% fail on Prop shafts
        • 0.11% fail on Joints (3 times worse than other 2013 cars)
    • 3.7% fail on Exhaust system (4 times worse than other 2013 cars)
    • 0.11% fail on Body
      • 0.085% fail on Other body component
      • 0.028% fail on Panel
    • 0.028% fail on Fuel system
      • 0.028% fail on Fuel cap/sealing device
    • 0.028% fail on Bumpers
    • 0.028% fail on Engine mounting
      • 0.028% fail on Engine mounting condition
    • 0.028% fail on Doors
      • 0.028% fail on Other passenger's door
        • 0.028% fail on Door condition
    • 0.028% fail on Undertray
  • 9.4% fail on Lamps, reflectors and electrical equipment (19% worse than other 2013 cars)
    • 4.5% fail on Headlamps (110% worse than other 2013 cars)
      • 4.4% fail on Headlamp (130% worse than other 2013 cars)
      • 0.057% fail on Headlamp levelling device
      • 0.028% fail on Dipswitch
    • 2.4% fail on Registration plate lamp(s) (110% worse than other 2013 cars)
    • 2.0% fail on Headlamp aim
      • 1.3% fail on Headlamp aim (34% better than other 2013 cars)
      • 0.65% fail on Headlamp aim not tested (2 times worse than other 2013 cars)
    • 1.1% fail on Stop lamp (39% better than other 2013 cars)
    • 0.60% fail on Direction indicators
      • 0.60% fail on Flashing type
        • 0.46% fail on Side repeaters
        • 0.14% fail on Individual direction indicators
    • 0.26% fail on Reversing lamps
      • 0.26% fail on Reversing lamps
    • 0.23% fail on Front and rear fog lamps
      • 0.23% fail on Rear fog lamp
        • 0.23% fail on Rear fog lamp
    • 0.11% fail on Electrical equipment
      • 0.085% fail on Horn
      • 0.028% fail on Trailer electrical socket
    • 0.028% fail on Position lamps
      • 0.028% fail on Position lamp
  • 5.5% fail on Suspension (25% better than other 2013 cars)
    • 3.3% fail on Anti-roll bars (3 times worse than other 2013 cars)
      • 1.9% fail on Linkage ball joints (5 times worse than other 2013 cars)
      • 0.54% fail on Linkage ball joint dust cover (120% worse than other 2013 cars)
      • 0.43% fail on Ball joint (4 times worse than other 2013 cars)
      • 0.31% fail on Ball joint dust cover (180% worse than other 2013 cars)
      • 0.085% fail on Linkage pins and bushes
      • 0.057% fail on Pins and bushes
      • 0.028% fail on Anti-roll bar
    • 1.8% fail on Suspension arms (29% better than other 2013 cars)
      • 1.3% fail on Ball joint
      • 0.37% fail on Pins and bushes (60% better than other 2013 cars)
      • 0.085% fail on Ball joint dust cover
      • 0.028% fail on Suspension arm
      • 0.028% fail on Attachment bracket and mounting
    • 0.23% fail on Wheel bearings
    • 0.20% fail on Springs (95% better than other 2013 cars)
      • 0.20% fail on Coil springs (95% better than other 2013 cars)
        • 0.20% fail on Coil spring (94% better than other 2013 cars)
    • 0.20% fail on Other suspension component
      • 0.20% fail on Ball joint (190% worse than other 2013 cars)
    • 0.085% fail on Suspension rods
      • 0.057% fail on Ball joint (9 times worse than other 2013 cars)
      • 0.028% fail on Pins and bushes
    • 0.057% fail on Shock absorbers (85% better than other 2013 cars)
    • 0.057% fail on Macpherson strut
      • 0.028% fail on Macpherson strut
      • 0.028% fail on Pins and bushes
  • 5.4% fail on Brakes
    • 4.4% fail on Mechanical brake components (66% worse than other 2013 cars)
      • 2.9% fail on Brake linings and pads (47% worse than other 2013 cars)
        • 2.9% fail on Brake pads (48% worse than other 2013 cars)
      • 2.0% fail on Brake discs and drums (130% worse than other 2013 cars)
        • 2.0% fail on Brake discs (130% worse than other 2013 cars)
      • 0.028% fail on Brake cables, rods, levers and linkages
        • 0.028% fail on Cable
    • 1.2% fail on Brake performance (42% better than other 2013 cars)
      • 0.88% fail on Service brake performance
        • 0.88% fail on Rbt
          • 0.77% fail on Service brake performance
          • 0.11% fail on Service brake imbalance
      • 0.20% fail on Service Brake Efficiency (sp)
        • 0.20% fail on Rbt (sp)
          • 0.14% fail on Service brake imbalance
          • 0.057% fail on Service brake performance
      • 0.17% fail on Parking brake efficiency (sp) (77% better than other 2013 cars)
        • 0.17% fail on Rbt (sp) (76% better than other 2013 cars)
      • 0.085% fail on Parking brake performance (75% better than other 2013 cars)
        • 0.085% fail on Rbt (74% better than other 2013 cars)
          • 0.057% fail on Parking brake performance (81% better than other 2013 cars)
          • 0.028% fail on Parking (secondary brake performance)
      • 0.028% fail on Brake performance not tested
    • 0.23% fail on ABS / EBS / ESC
      • 0.23% fail on Electronic stability control
      • 0.028% fail on Anti-lock braking system
    • 0.057% fail on Rigid brake pipes (81% better than other 2013 cars)
    • 0.028% fail on Service brake pedal or hand lever
      • 0.028% fail on Pedal
  • 4.4% fail on Tyres
    • 2.9% fail on Tread depth
    • 1.5% fail on Condition (41% better than other 2013 cars)
    • 0.20% fail on Size/type
  • 3.7% fail on Noise, emissions and leaks (120% worse than other 2013 cars)
    • 3.6% fail on Exhaust emissions (120% worse than other 2013 cars)
      • 2.7% fail on Spark ignition (160% worse than other 2013 cars)
        • 1.9% fail on Catalyst emissions (3 times worse than other 2013 cars)
        • 0.68% fail on Malfunction indicator lamp
        • 0.37% fail on Emissions not tested (2 times worse than other 2013 cars)
        • 0.028% fail on Non catalyst emissions
      • 1.00% fail on Compression ignition (61% worse than other 2013 cars)
        • 0.48% fail on Malfunction indicator lamp
        • 0.40% fail on On or after 01/07/2008
        • 0.057% fail on Pre 01/07/2008 Non turbo
        • 0.028% fail on Emission control equipment
          • 0.028% fail on Other emission control equipment
        • 0.028% fail on Pre 01/07/2008 Turbo
    • 0.11% fail on Fluid leaks
      • 0.11% fail on Engine oil leaks
  • 2.2% fail on Visibility (46% better than other 2013 cars)
    • 1.8% fail on Washers
    • 0.43% fail on Wipers (81% better than other 2013 cars)
    • 0.085% fail on View to rear
      • 0.057% fail on Mirrors
      • 0.028% fail on Indirect vision devices
  • 0.51% fail on Seat belts and supplementary restraint systems
    • 0.43% fail on Seat belts
      • 0.43% fail on Condition (110% worse than other 2013 cars)
    • 0.11% fail on SRS malfunction indicator lamp
  • 0.40% fail on Steering (69% better than other 2013 cars)
    • 0.31% fail on Steering linkage components (73% better than other 2013 cars)
      • 0.28% fail on Track rod end (74% better than other 2013 cars)
      • 0.028% fail on Ball joint
    • 0.028% fail on Steering gear
      • 0.028% fail on Operation
    • 0.028% fail on Power steering
      • 0.028% fail on Operation
    • 0.028% fail on Steering wheel
  • 0.31% fail on Road Wheels
    • 0.31% fail on Attachment
  • 0.085% fail on Identification of the vehicle
    • 0.085% fail on Registration plates
Read the Honest John Review

  • Peugeot 2008 (2013 - 2019)
    Excellent 1.2-litre PureTech petrol engine, more spacious and practical than the 208, post-facelift version looks smart.

    Search Good Garages