MOT Results

Honest John Good Garage Guide MOT Results » Perodua » Myvi » 2012

Perodua Myvi MOT Results

Registered in 2012
77.5% pass rate
from 342 tests in 2021
(28% better than other 2012 cars)
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Perodua Myvi is unusually good or bad.

  • 5.8% fail on Visibility
    • 3.8% fail on Wipers
    • 1.5% fail on Washers
    • 0.58% fail on Condition of glass (7 times worse than other 2012 cars)
      • 0.58% fail on Windscreen (7 times worse than other 2012 cars)
  • 5.6% fail on Brakes
    • 2.0% fail on Mechanical brake components
      • 1.5% fail on Brake linings and pads
        • 1.5% fail on Brake pads
      • 0.58% fail on Brake discs and drums
        • 0.58% fail on Brake discs
    • 1.8% fail on Rigid brake pipes (2 times worse than other 2012 cars)
    • 1.2% fail on ABS / EBS / ESC
      • 1.2% fail on Anti-lock braking system (4 times worse than other 2012 cars)
    • 0.88% fail on Brake performance
      • 0.58% fail on Service Brake Efficiency (sp)
        • 0.58% fail on Rbt (sp)
          • 0.58% fail on Service brake imbalance
          • 0.29% fail on Service brake performance
      • 0.29% fail on Service brake performance
        • 0.29% fail on Rbt
          • 0.29% fail on Service brake imbalance
      • 0.29% fail on Parking brake efficiency (sp)
        • 0.29% fail on Rbt (sp)
    • 0.29% fail on Service brake pedal or hand lever
      • 0.29% fail on Pedal
  • 5.3% fail on Lamps, reflectors and electrical equipment (43% better than other 2012 cars)
    • 2.3% fail on Headlamp aim
      • 2.3% fail on Headlamp aim
    • 1.2% fail on Stop lamp
    • 0.88% fail on Headlamps
      • 0.88% fail on Headlamp levelling device (7 times worse than other 2012 cars)
    • 0.58% fail on Direction indicators
      • 0.58% fail on Flashing type
        • 0.58% fail on Side repeaters
    • 0.58% fail on Registration plate lamp(s)
    • 0.29% fail on Electrical equipment
      • 0.29% fail on Battery(ies)
  • 5.0% fail on Suspension (47% better than other 2012 cars)
    • 4.1% fail on Anti-roll bars (160% worse than other 2012 cars)
      • 2.3% fail on Linkage ball joints (2 times worse than other 2012 cars)
      • 0.58% fail on Linkage
      • 0.58% fail on Ball joint
      • 0.29% fail on Attachment bracket and mounting
      • 0.29% fail on Linkage ball joint dust cover
    • 0.88% fail on Wheel bearings
    • 0.58% fail on Macpherson strut (5 times worse than other 2012 cars)
      • 0.58% fail on Pins and bushes (14 times worse than other 2012 cars)
    • 0.29% fail on Suspension arms
      • 0.29% fail on Ball joint
  • 4.4% fail on Tyres
    • 2.3% fail on Tread depth
    • 1.5% fail on Condition
    • 0.58% fail on Size/type
  • 2.0% fail on Noise, emissions and leaks
    • 2.0% fail on Exhaust emissions
      • 2.0% fail on Spark ignition
        • 1.2% fail on Malfunction indicator lamp
        • 0.58% fail on Emissions not tested
        • 0.29% fail on Catalyst emissions
  • 1.2% fail on Steering
    • 0.58% fail on Steering gear
      • 0.58% fail on Steering rack
    • 0.58% fail on Steering linkage components
      • 0.58% fail on Track rod end
  • 1.2% fail on Body, chassis, structure
    • 0.58% fail on Exhaust system
    • 0.29% fail on Bumpers
    • 0.29% fail on Doors
      • 0.29% fail on Other passenger's door
        • 0.29% fail on Door condition
  • 0.58% fail on Seat belts and supplementary restraint systems
    • 0.58% fail on Seat belts
      • 0.58% fail on Condition
Read the Honest John Review

Search Good Garages