Mitsubishi Shogun Sport MOT Results

Registered in 2000
53.6% pass rate
from 84 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the Mitsubishi Shogun Sport is unusually good or bad.

  • 25% fail on Suspension
    • 9.5% fail on Component mounting prescribed areas
    • 8.3% fail on Anti-roll bars
      • 6.0% fail on Pins and bushes (13 times worse than other 2000 cars)
      • 2.4% fail on Linkage pins and bushes
    • 4.8% fail on Suspension arms
      • 3.6% fail on Ball joint
      • 1.2% fail on Ball joint dust cover
    • 3.6% fail on Wheel bearings
    • 2.4% fail on Shock absorbers
    • 2.4% fail on Sub-frames
      • 2.4% fail on Sub-frame mounting prescribed areas (5 times worse than other 2000 cars)
    • 1.2% fail on Springs
      • 1.2% fail on Coil springs
        • 1.2% fail on Coil spring
  • 24% fail on Brakes (81% worse than other 2000 cars)
    • 11% fail on Rigid brake pipes (2 times worse than other 2000 cars)
    • 8.3% fail on Brake performance
      • 4.8% fail on Service brake performance
        • 4.8% fail on Rbt
          • 4.8% fail on Service brake performance
          • 1.2% fail on Service brake imbalance
      • 3.6% fail on Parking brake efficiency (sp)
        • 3.6% fail on Rbt (sp)
      • 2.4% fail on Service Brake Efficiency (sp)
        • 2.4% fail on Rbt (sp)
          • 2.4% fail on Service brake performance
    • 4.8% fail on Load sensing valves (14 times worse than other 2000 cars)
    • 3.6% fail on Mechanical brake components
      • 2.4% fail on Brake linings and pads
        • 2.4% fail on Brake pads
      • 1.2% fail on Brake discs and drums
        • 1.2% fail on Brake drums
    • 1.2% fail on Service brake pedal or hand lever
      • 1.2% fail on Pedal
    • 1.2% fail on Other components and prescribed areas
      • 1.2% fail on Prescribed areas
        • 1.2% fail on Other braking system component
    • 1.2% fail on ABS / EBS / ESC
      • 1.2% fail on Anti-lock braking system
  • 15% fail on Lamps, reflectors and electrical equipment
    • 8.3% fail on Headlamps
      • 8.3% fail on Headlamp
    • 4.8% fail on Electrical equipment (4 times worse than other 2000 cars)
      • 3.6% fail on Battery(ies) (6 times worse than other 2000 cars)
      • 1.2% fail on Trailer electrical socket
    • 3.6% fail on Front and rear fog lamps
      • 3.6% fail on Rear fog lamp
        • 3.6% fail on Rear fog lamp
    • 2.4% fail on Stop lamp
    • 1.2% fail on Headlamp aim
      • 1.2% fail on Headlamp aim
    • 1.2% fail on Registration plate lamp(s)
  • 14% fail on Body, chassis, structure
    • 7.1% fail on Integral vehicle structure (3 times worse than other 2000 cars)
      • 6.0% fail on Integral vehicle structure condition (3 times worse than other 2000 cars)
      • 1.2% fail on Strengthening plate
    • 4.8% fail on Chassis (3 times worse than other 2000 cars)
      • 4.8% fail on Chassis condition (3 times worse than other 2000 cars)
    • 4.8% fail on Exhaust system
    • 1.2% fail on Transmission
      • 1.2% fail on Drive shafts
        • 1.2% fail on Joints
    • 1.2% fail on Body
      • 1.2% fail on Panel
    • 1.2% fail on Cabs
      • 1.2% fail on Steps
  • 11% fail on Visibility
    • 9.5% fail on Washers (180% worse than other 2000 cars)
    • 3.6% fail on Wipers
    • 1.2% fail on Bonnet
  • 11% fail on Noise, emissions and leaks
    • 8.3% fail on Exhaust emissions
      • 4.8% fail on Spark ignition
        • 4.8% fail on Malfunction indicator lamp
      • 3.6% fail on Compression ignition (5 times worse than other 2000 cars)
        • 2.4% fail on Pre 01/07/2008 Turbo (11 times worse than other 2000 cars)
        • 1.2% fail on Emissions not tested
    • 2.4% fail on Fluid leaks
      • 1.2% fail on Engine oil leaks
      • 1.2% fail on Transmission oil leaks
  • 8.3% fail on Steering
    • 8.3% fail on Steering linkage components (2 times worse than other 2000 cars)
      • 6.0% fail on Track rod end
      • 1.2% fail on Ball joint
      • 1.2% fail on Drag link end
      • 1.2% fail on Intermediate drop arm
  • 6.0% fail on Seat belts and supplementary restraint systems
    • 6.0% fail on Seat belts
      • 6.0% fail on Prescribed areas
  • 1.2% fail on Road Wheels
    • 1.2% fail on Attachment
  • 1.2% fail on Tyres
    • 1.2% fail on Tread depth
Read the Honest John Review

Search Good Garages