Mitsubishi Pajero MOT Results

Registered in 1998
63.0% pass rate
from 54 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1998 cars and highlighted areas where the Mitsubishi Pajero is unusually good or bad.

  • 22% fail on Brakes
    • 13% fail on Brake performance
      • 5.6% fail on Service brake performance
        • 5.6% fail on Rbt
          • 5.6% fail on Service brake performance
      • 5.6% fail on Service Brake Efficiency (sp)
        • 5.6% fail on Rbt (sp)
          • 3.7% fail on Service brake performance
          • 3.7% fail on Service brake imbalance
      • 1.9% fail on Parking brake performance
        • 1.9% fail on Rbt
          • 1.9% fail on Parking brake performance
      • 1.9% fail on Parking brake efficiency (sp)
        • 1.9% fail on Rbt (sp)
    • 5.6% fail on Rigid brake pipes
    • 3.7% fail on Mechanical brake components
      • 3.7% fail on Brake linings and pads
        • 3.7% fail on Brake pads
    • 1.9% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.9% fail on Hydraulic brake callipers
    • 1.9% fail on ABS / EBS / ESC
      • 1.9% fail on Anti-lock braking system
  • 19% fail on Lamps, reflectors and electrical equipment
    • 7.4% fail on Front and rear fog lamps (3 times worse than other 1998 cars)
      • 7.4% fail on Rear fog lamp (3 times worse than other 1998 cars)
        • 7.4% fail on Rear fog lamp (3 times worse than other 1998 cars)
    • 5.6% fail on Stop lamp
    • 5.6% fail on Registration plate lamp(s)
    • 1.9% fail on Headlamps
      • 1.9% fail on Headlamp
    • 1.9% fail on Direction indicators
      • 1.9% fail on Flashing type
        • 1.9% fail on Individual direction indicators
    • 1.9% fail on Electrical equipment
      • 1.9% fail on Trailer electrical socket
  • 15% fail on Body, chassis, structure
    • 7.4% fail on Exhaust system
    • 5.6% fail on Integral vehicle structure
      • 5.6% fail on Integral vehicle structure condition
    • 3.7% fail on Chassis
      • 3.7% fail on Chassis condition
    • 1.9% fail on Fuel system
      • 1.9% fail on Fuel cap/sealing device
  • 13% fail on Suspension
    • 5.6% fail on Anti-roll bars
      • 3.7% fail on Linkage pins and bushes (8 times worse than other 1998 cars)
      • 1.9% fail on Pins and bushes
    • 3.7% fail on Component mounting prescribed areas
    • 1.9% fail on Springs
      • 1.9% fail on Spring mounting prescribed areas
    • 1.9% fail on Shock absorbers
    • 1.9% fail on Sub-frames
      • 1.9% fail on Sub-frame mounting prescribed areas
  • 7.4% fail on Visibility
    • 5.6% fail on Wipers
    • 1.9% fail on Washers
  • 5.6% fail on Seat belts and supplementary restraint systems
    • 5.6% fail on Seat belts
      • 5.6% fail on Prescribed areas
  • 5.6% fail on Noise, emissions and leaks
    • 5.6% fail on Exhaust emissions
      • 3.7% fail on Compression ignition (5 times worse than other 1998 cars)
        • 3.7% fail on Pre 01/07/2008 Turbo (14 times worse than other 1998 cars)
      • 1.9% fail on Spark ignition
        • 1.9% fail on Catalyst emissions
  • 3.7% fail on Steering
    • 3.7% fail on Steering linkage components
      • 3.7% fail on Intermediate drop arm (119 times worse than other 1998 cars)

Search Good Garages