MINI Clubman MOT Results

Registered in 1980

69.4% pass rate

from 49 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1980 cars and highlighted areas where the MINI Clubman is unusually good or bad.

22% fail on Lamps, reflectors and electrical equipment
- 8.2% fail on Headlamp aim
  - 8.2% fail on Headlamp aim
- 6.1% fail on Registration plate lamp(s) (3 times worse than other 1980 cars)
- 6.1% fail on Electrical equipment
  - 6.1% fail on Horn (4 times worse than other 1980 cars)
- 2.0% fail on Stop lamp
- 2.0% fail on Direction indicators
  - 2.0% fail on Flashing type
    - 2.0% fail on All direction indicators
- 2.0% fail on Front and rear fog lamps
  - 2.0% fail on Rear fog lamp
    - 2.0% fail on Rear fog lamp
12% fail on Noise, emissions and leaks
- 12% fail on Exhaust emissions
  - 12% fail on Spark ignition
    - 10% fail on Non catalyst emissions
    - 2.0% fail on Catalyst emissions
    - 2.0% fail on Emissions not tested
10% fail on Body, chassis, structure
- 4.1% fail on Exhaust system
- 2.0% fail on Integral vehicle structure
  - 2.0% fail on Integral vehicle structure condition
- 2.0% fail on Transmission
  - 2.0% fail on Drive shafts
    - 2.0% fail on Joints
- 2.0% fail on Engine mounting
  - 2.0% fail on Bracket
- 2.0% fail on Doors
  - 2.0% fail on Front passenger's door
    - 2.0% fail on Door condition
8.2% fail on Brakes
- 6.1% fail on Brake performance
  - 4.1% fail on Parking brake efficiency (sp)
    - 4.1% fail on Rbt (sp)
  - 2.0% fail on Service brake performance
    - 2.0% fail on Rbt
      - 2.0% fail on Service brake performance
      - 2.0% fail on Service brake imbalance
  - 2.0% fail on Service Brake Efficiency (sp)
    - 2.0% fail on Rbt (sp)
      - 2.0% fail on Service brake imbalance
  - 2.0% fail on Parking brake performance
    - 2.0% fail on Rbt
      - 2.0% fail on Parking brake performance
- 2.0% fail on Service brake pedal or hand lever
  - 2.0% fail on Pedal
- 2.0% fail on Parking brake control
  - 2.0% fail on Lever
- 2.0% fail on Mechanical brake components
  - 2.0% fail on Brake cables, rods, levers and linkages
    - 2.0% fail on Pivot
4.1% fail on Steering
- 2.0% fail on Steering gear
  - 2.0% fail on Steering rack
- 2.0% fail on Steering linkage components
  - 2.0% fail on Track rod end
4.1% fail on Visibility
- 2.0% fail on Wipers
- 2.0% fail on Washers
2.0% fail on Suspension
- 2.0% fail on Wheel bearings
2.0% fail on Tyres
- 2.0% fail on Tread depth