MINI 1000 MOT Results

Registered in 1982

66.3% pass rate

from 205 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1982 cars and highlighted areas where the MINI 1000 is unusually good or bad.

16% fail on Lamps, reflectors and electrical equipment
- 5.9% fail on Front and rear fog lamps
  - 5.9% fail on Rear fog lamp
    - 5.9% fail on Rear fog lamp
- 4.9% fail on Headlamps
  - 4.9% fail on Headlamp
- 4.4% fail on Direction indicators
  - 4.4% fail on Flashing type
    - 2.4% fail on Individual direction indicators
    - 2.0% fail on All direction indicators
- 3.4% fail on Headlamp aim
  - 2.9% fail on Headlamp aim
  - 0.49% fail on Headlamp aim not tested
- 2.4% fail on Electrical equipment
  - 2.4% fail on Horn
- 2.0% fail on Registration plate lamp(s)
- 1.5% fail on Stop lamp
- 0.98% fail on Mandatory tell-tales
  - 0.98% fail on Rear fog lamp tell-tale
12% fail on Noise, emissions and leaks (94% worse than other 1982 cars)
- 12% fail on Exhaust emissions (100% worse than other 1982 cars)
  - 11% fail on Spark ignition (100% worse than other 1982 cars)
    - 11% fail on Non catalyst emissions (120% worse than other 1982 cars)
    - 0.49% fail on Emissions not tested
  - 0.49% fail on Compression ignition
    - 0.49% fail on On or after 01/07/2008
- 0.49% fail on Fluid leaks
  - 0.49% fail on Engine oil leaks
11% fail on Brakes
- 8.8% fail on Brake performance
  - 5.4% fail on Parking brake efficiency (sp) (120% worse than other 1982 cars)
    - 4.9% fail on Rbt (sp)
    - 0.49% fail on Decelerometer (sp)
  - 3.9% fail on Service brake performance
    - 3.9% fail on Rbt
      - 2.9% fail on Service brake performance
      - 0.98% fail on Service brake imbalance
  - 3.9% fail on Service Brake Efficiency (sp)
    - 3.9% fail on Rbt (sp)
      - 2.9% fail on Service brake imbalance
      - 2.4% fail on Service brake performance
  - 0.98% fail on Parking brake performance
    - 0.98% fail on Rbt
      - 0.98% fail on Parking brake performance
      - 0.49% fail on Parking (secondary brake performance)
- 2.4% fail on Service brake pedal or hand lever (3 times worse than other 1982 cars)
  - 2.4% fail on Pedal (3 times worse than other 1982 cars)
- 0.98% fail on Flexible brake hoses
- 0.98% fail on Mechanical brake components
  - 0.49% fail on Brake discs and drums
    - 0.49% fail on Brake discs
  - 0.49% fail on Brake cables, rods, levers and linkages
    - 0.49% fail on Cable
- 0.49% fail on Hydraulic systems
  - 0.49% fail on Valves
- 0.49% fail on Rigid brake pipes
- 0.49% fail on Brake actuators (including spring brakes or hydraulic cylinders)
  - 0.49% fail on Hydraulic brake cylinder
- 0.49% fail on Other components and prescribed areas
  - 0.49% fail on Prescribed areas
    - 0.49% fail on Master cylinder/servo mounting
11% fail on Suspension
- 3.9% fail on Sub-frames (7 times worse than other 1982 cars)
  - 2.9% fail on Sub-frame mounting prescribed areas (7 times worse than other 1982 cars)
  - 0.49% fail on Attachment bracket and mounting
  - 0.49% fail on Pins and bushes
- 3.4% fail on Suspension arms
  - 2.0% fail on Ball joint dust cover
  - 0.98% fail on Ball joint
  - 0.49% fail on Pins and bushes
- 2.4% fail on Component mounting prescribed areas
- 2.0% fail on Other suspension component (5 times worse than other 1982 cars)
  - 1.5% fail on Ball joint (13 times worse than other 1982 cars)
  - 0.49% fail on Ball joint dust cover
- 1.5% fail on Wheel bearings
- 0.98% fail on Shock absorbers
10% fail on Body, chassis, structure
- 4.4% fail on Transmission (2 times worse than other 1982 cars)
  - 4.4% fail on Drive shafts (3 times worse than other 1982 cars)
    - 4.4% fail on Joints (3 times worse than other 1982 cars)
- 2.4% fail on Chassis
  - 2.0% fail on Chassis condition
  - 0.49% fail on Strengthening plate
- 2.0% fail on Integral vehicle structure
  - 1.5% fail on Integral vehicle structure condition
  - 0.49% fail on Sub-frame
    - 0.49% fail on Strengthening plate
- 1.5% fail on Exhaust system
- 0.98% fail on Seats
  - 0.49% fail on Driver's seat
  - 0.49% fail on Passenger's seat
- 0.49% fail on Fuel system
  - 0.49% fail on Fuel cap/sealing device
- 0.49% fail on Engine mounting
  - 0.49% fail on Engine mounting condition
6.8% fail on Visibility
- 3.4% fail on Wipers
- 2.4% fail on Washers
- 0.98% fail on View to rear
  - 0.98% fail on Mirrors
5.9% fail on Steering
- 2.9% fail on Steering gear
  - 2.9% fail on Steering rack
- 2.4% fail on Steering linkage components
  - 2.0% fail on Track rod end
  - 0.49% fail on Ball joint
- 0.98% fail on Steering column (5 times worse than other 1982 cars)
- 0.49% fail on Steering wheel
3.4% fail on Identification of the vehicle (3 times worse than other 1982 cars)
- 3.4% fail on Registration plates (3 times worse than other 1982 cars)
2.4% fail on Tyres
- 2.0% fail on Tread depth (4 times worse than other 1982 cars)
- 0.49% fail on Condition
2.0% fail on Seat belts and supplementary restraint systems
- 2.0% fail on Seat belts
  - 2.0% fail on Prescribed areas