Mazda MPV MOT Results

Registered in 2002
57.1% pass rate
from 14 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2002 cars and highlighted areas where the Mazda MPV is unusually good or bad.

  • 29% fail on Suspension
    • 21% fail on Anti-roll bars (3 times worse than other 2002 cars)
      • 14% fail on Ball joint dust cover (26 times worse than other 2002 cars)
      • 7.1% fail on Ball joint
    • 14% fail on Component mounting prescribed areas
  • 14% fail on Brakes
    • 14% fail on Mechanical brake components
      • 14% fail on Brake linings and pads (6 times worse than other 2002 cars)
        • 14% fail on Brake pads (7 times worse than other 2002 cars)
    • 14% fail on Brake performance
      • 7.1% fail on Service brake performance
        • 7.1% fail on Rbt
          • 7.1% fail on Service brake performance
      • 7.1% fail on Parking brake efficiency (sp)
        • 7.1% fail on Decelerometer (sp)
  • 14% fail on Body, chassis, structure
    • 14% fail on Chassis (20 times worse than other 2002 cars)
      • 14% fail on Chassis condition (20 times worse than other 2002 cars)
    • 7.1% fail on Integral vehicle structure
      • 7.1% fail on Integral vehicle structure condition
  • 7.1% fail on Identification of the vehicle
    • 7.1% fail on Registration plates
  • 7.1% fail on Steering
    • 7.1% fail on Power steering
      • 7.1% fail on Operation
      • 7.1% fail on Other components
  • 7.1% fail on Visibility
    • 7.1% fail on Washers
  • 7.1% fail on Lamps, reflectors and electrical equipment
    • 7.1% fail on Stop lamp
  • 7.1% fail on Seat belts and supplementary restraint systems
    • 7.1% fail on Seat belts
      • 7.1% fail on Requirements
  • 7.1% fail on Tyres
    • 7.1% fail on Condition

Search Good Garages