LTI TX1 MOT Results

Registered in 2002
51.9% pass rate
from 54 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2002 cars and highlighted areas where the LTI TX1 is unusually good or bad.

  • 24% fail on Body, chassis, structure (140% worse than other 2002 cars)
    • 13% fail on Integral vehicle structure (10 times worse than other 2002 cars)
      • 13% fail on Integral vehicle structure condition (10 times worse than other 2002 cars)
    • 3.7% fail on Chassis
      • 3.7% fail on Chassis condition
    • 3.7% fail on Exhaust system
    • 1.9% fail on Fuel system
      • 1.9% fail on Tank
    • 1.9% fail on Bumpers
    • 1.9% fail on Body
      • 1.9% fail on Mounting fixings
    • 1.9% fail on Cabs
      • 1.9% fail on Prescribed areas
  • 22% fail on Brakes
    • 20% fail on Brake performance (160% worse than other 2002 cars)
      • 9.3% fail on Service brake performance
        • 9.3% fail on Rbt
          • 5.6% fail on Service brake performance
          • 3.7% fail on Service brake imbalance
      • 7.4% fail on Parking brake efficiency (sp)
        • 7.4% fail on Rbt (sp)
      • 5.6% fail on Service Brake Efficiency (sp)
        • 5.6% fail on Rbt (sp)
          • 5.6% fail on Service brake imbalance
          • 3.7% fail on Service brake performance
      • 5.6% fail on Parking brake performance
        • 5.6% fail on Rbt
          • 3.7% fail on Parking brake performance
          • 1.9% fail on Parking (secondary brake performance)
    • 5.6% fail on Mechanical brake components
      • 5.6% fail on Brake linings and pads
        • 5.6% fail on Brake pads
    • 3.7% fail on Rigid brake pipes
    • 1.9% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 1.9% fail on Hydraulic brake cylinder
  • 15% fail on Suspension
    • 5.6% fail on Wheel bearings
    • 5.6% fail on Suspension arms
      • 3.7% fail on Pins and bushes
      • 1.9% fail on Ball joint dust cover
    • 1.9% fail on Springs
      • 1.9% fail on Leaf springs
        • 1.9% fail on Leaf spring
    • 1.9% fail on Suspension rods
      • 1.9% fail on Ball joint dust cover
    • 1.9% fail on Other suspension component
      • 1.9% fail on Ball joint
    • 1.9% fail on Component mounting prescribed areas
  • 13% fail on Seat belts and supplementary restraint systems (2 times worse than other 2002 cars)
    • 13% fail on Seat belts (5 times worse than other 2002 cars)
      • 13% fail on Prescribed areas (8 times worse than other 2002 cars)
  • 9.3% fail on Steering
    • 9.3% fail on Steering linkage components (2 times worse than other 2002 cars)
      • 5.6% fail on Track rod end
      • 3.7% fail on Intermediate drop arm (358 times worse than other 2002 cars)
      • 1.9% fail on Drag link end
  • 9.3% fail on Visibility
    • 5.6% fail on Washers
    • 3.7% fail on Wipers
  • 9.3% fail on Lamps, reflectors and electrical equipment
    • 3.7% fail on Headlamps
      • 3.7% fail on Headlamp
    • 3.7% fail on Headlamp aim
      • 1.9% fail on Headlamp aim
      • 1.9% fail on Headlamp aim not tested
    • 3.7% fail on Direction indicators
      • 3.7% fail on Flashing type
        • 1.9% fail on Individual direction indicators
        • 1.9% fail on Side repeaters
    • 1.9% fail on Position lamps
      • 1.9% fail on Position lamp
    • 1.9% fail on Stop lamp
    • 1.9% fail on Registration plate lamp(s)
  • 7.4% fail on Tyres
    • 7.4% fail on Tread depth
    • 1.9% fail on Condition
  • 1.9% fail on Noise, emissions and leaks
    • 1.9% fail on Exhaust emissions
      • 1.9% fail on Spark ignition
        • 1.9% fail on Catalyst emissions

Search Good Garages