FIAT Stilo MOT Results

Registered in 2007

54.2% pass rate

from 155 tests in 2021

More MoT Results

Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2007 cars and highlighted areas where the FIAT Stilo is unusually good or bad.

23% fail on Suspension
- 8.4% fail on Springs
  - 8.4% fail on Coil springs
    - 8.4% fail on Coil spring
- 7.1% fail on Suspension arms
  - 3.9% fail on Pins and bushes
  - 3.2% fail on Ball joint
  - 0.65% fail on Ball joint dust cover
- 5.2% fail on Anti-roll bars
  - 3.2% fail on Linkage ball joints
  - 1.3% fail on Ball joint dust cover
  - 0.65% fail on Linkage ball joint dust cover
- 1.3% fail on Component mounting prescribed areas
- 0.65% fail on Shock absorbers
- 0.65% fail on Sub-frames
  - 0.65% fail on Pins and bushes
- 0.65% fail on Other suspension component
  - 0.65% fail on Ball joint
17% fail on Lamps, reflectors and electrical equipment
- 9.7% fail on Headlamp aim (180% worse than other 2007 cars)
  - 9.7% fail on Headlamp aim (2 times worse than other 2007 cars)
- 5.2% fail on Headlamps
  - 2.6% fail on Headlamp
  - 2.6% fail on Headlamp levelling device (11 times worse than other 2007 cars)
- 3.2% fail on Direction indicators
  - 3.2% fail on Flashing type
    - 1.9% fail on Individual direction indicators
    - 1.3% fail on Side repeaters
- 1.9% fail on Stop lamp
- 0.65% fail on Front and rear fog lamps
  - 0.65% fail on Rear fog lamp
    - 0.65% fail on Rear fog lamp
- 0.65% fail on Registration plate lamp(s)
10% fail on Noise, emissions and leaks
- 10% fail on Exhaust emissions (89% worse than other 2007 cars)
  - 9.0% fail on Spark ignition (120% worse than other 2007 cars)
    - 5.8% fail on Catalyst emissions (180% worse than other 2007 cars)
    - 2.6% fail on Emissions not tested (3 times worse than other 2007 cars)
    - 1.9% fail on Malfunction indicator lamp
  - 1.9% fail on Compression ignition
    - 1.3% fail on Pre 01/07/2008 Turbo
    - 0.65% fail on Malfunction indicator lamp
8.4% fail on Brakes
- 6.5% fail on Brake performance
  - 3.2% fail on Parking brake efficiency (sp)
    - 3.2% fail on Rbt (sp)
  - 2.6% fail on Service brake performance
    - 2.6% fail on Rbt
      - 1.9% fail on Service brake performance
      - 0.65% fail on Service brake imbalance
  - 0.65% fail on Parking brake performance
    - 0.65% fail on Rbt
      - 0.65% fail on Parking brake performance
- 2.6% fail on Mechanical brake components
  - 1.9% fail on Brake linings and pads
    - 1.9% fail on Brake pads
  - 0.65% fail on Brake discs and drums
    - 0.65% fail on Brake discs
- 0.65% fail on ABS / EBS / ESC
  - 0.65% fail on Anti-lock braking system
7.1% fail on Body, chassis, structure
- 5.8% fail on Exhaust system
- 0.65% fail on Transmission
  - 0.65% fail on Drive shafts
    - 0.65% fail on Joints
- 0.65% fail on Body
  - 0.65% fail on Other body component
5.2% fail on Visibility
- 2.6% fail on Washers
- 1.9% fail on Wipers
- 0.65% fail on Bonnet
3.2% fail on Steering
- 3.2% fail on Steering linkage components
  - 2.6% fail on Track rod end
  - 0.65% fail on Lock stop
3.2% fail on Tyres
- 1.9% fail on Tread depth
- 1.3% fail on Condition
- 0.65% fail on Size/type
1.3% fail on Identification of the vehicle
- 1.3% fail on Registration plates