FIAT Multipla MOT Results
Registered in 200059.4% pass rate
from 32 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2000 cars and highlighted areas where the FIAT Multipla is unusually good or bad.
-
19% fail on
Suspension
-
13% fail on
Suspension arms
- 9.4% fail on Pins and bushes (4 times worse than other 2000 cars)
- 3.1% fail on Ball joint
-
3.1% fail on
Anti-roll bars
- 3.1% fail on Linkage ball joint dust cover
-
3.1% fail on
Sub-frames
- 3.1% fail on Sub-frame mounting prescribed areas
-
13% fail on
Suspension arms
-
13% fail on
Brakes
-
13% fail on
Brake performance
-
6.3% fail on
Parking brake efficiency (sp)
- 6.3% fail on Rbt (sp)
-
3.1% fail on
Service brake performance
-
3.1% fail on
Rbt
- 3.1% fail on Service brake performance
-
3.1% fail on
Rbt
-
3.1% fail on
Service Brake Efficiency (sp)
-
3.1% fail on
Rbt (sp)
- 3.1% fail on Service brake imbalance
-
3.1% fail on
Rbt (sp)
-
6.3% fail on
Parking brake efficiency (sp)
-
3.1% fail on
Mechanical brake components
-
3.1% fail on
Brake cables, rods, levers and linkages
- 3.1% fail on Cable
-
3.1% fail on
Brake cables, rods, levers and linkages
-
13% fail on
Brake performance
-
13% fail on
Lamps, reflectors and electrical equipment
-
6.3% fail on
Headlamps
- 6.3% fail on Headlamp
-
3.1% fail on
Direction indicators
-
3.1% fail on
Flashing type
- 3.1% fail on Side repeaters
-
3.1% fail on
Flashing type
- 3.1% fail on Registration plate lamp(s)
-
6.3% fail on
Headlamps
-
13% fail on
Body, chassis, structure
- 6.3% fail on Exhaust system
-
3.1% fail on
Chassis
- 3.1% fail on Chassis condition
-
3.1% fail on
Transmission
-
3.1% fail on
Drive shafts
- 3.1% fail on Joints
-
3.1% fail on
Drive shafts
-
6.3% fail on
Visibility
- 6.3% fail on Washers
-
3.1% fail on
Condition of glass
- 3.1% fail on Windscreen
-
6.3% fail on
Noise, emissions and leaks
-
6.3% fail on
Exhaust emissions
-
3.1% fail on
Spark ignition
- 3.1% fail on Catalyst emissions
-
3.1% fail on
Compression ignition
- 3.1% fail on Emissions not tested
-
3.1% fail on
Spark ignition
-
6.3% fail on
Exhaust emissions
-
6.3% fail on
Tyres
- 3.1% fail on Condition
- 3.1% fail on Tread depth
-
3.1% fail on
Steering
-
3.1% fail on
Steering linkage components
- 3.1% fail on Track rod end
-
3.1% fail on
Steering linkage components