MOT Results

Honest John Good Garage Guide MOT Results » Daihatsu » Fourtrak » 1996

Daihatsu Fourtrak MOT Results

Registered in 1996
54.2% pass rate
from 155 tests in 2021
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1996 cars and highlighted areas where the Daihatsu Fourtrak is unusually good or bad.

  • 21% fail on Lamps, reflectors and electrical equipment (61% worse than other 1996 cars)
    • 7.1% fail on Stop lamp (130% worse than other 1996 cars)
    • 6.5% fail on Front and rear fog lamps (200% worse than other 1996 cars)
      • 6.5% fail on Rear fog lamp (200% worse than other 1996 cars)
        • 6.5% fail on Rear fog lamp (200% worse than other 1996 cars)
    • 5.2% fail on Headlamp aim
      • 5.2% fail on Headlamp aim
    • 4.5% fail on Direction indicators
      • 4.5% fail on Flashing type
        • 4.5% fail on Individual direction indicators (180% worse than other 1996 cars)
    • 1.3% fail on Headlamps
      • 1.3% fail on Headlamp
    • 1.3% fail on Registration plate lamp(s)
    • 1.3% fail on Electrical equipment
      • 0.65% fail on Trailer electrical socket
      • 0.65% fail on Horn
    • 0.65% fail on Position lamps
      • 0.65% fail on Position lamp
  • 20% fail on Suspension (63% worse than other 1996 cars)
    • 8.4% fail on Suspension arms (150% worse than other 1996 cars)
      • 4.5% fail on Ball joint (2 times worse than other 1996 cars)
      • 3.2% fail on Ball joint dust cover (3 times worse than other 1996 cars)
      • 1.9% fail on Pins and bushes
      • 1.3% fail on Suspension arm
    • 7.7% fail on Component mounting prescribed areas
    • 4.5% fail on Springs (2 times worse than other 1996 cars)
      • 3.2% fail on Spring mounting prescribed areas (17 times worse than other 1996 cars)
      • 1.3% fail on Coil springs
        • 0.65% fail on Coil spring
        • 0.65% fail on Mounting
    • 4.5% fail on Anti-roll bars
      • 1.9% fail on Pins and bushes (7 times worse than other 1996 cars)
      • 1.3% fail on Linkage (7 times worse than other 1996 cars)
      • 0.65% fail on Attachment bracket and mounting
      • 0.65% fail on Linkage pins and bushes
    • 2.6% fail on Wheel bearings
    • 0.65% fail on Shock absorbers
    • 0.65% fail on Suspension rods
      • 0.65% fail on Attachment bracket and mounting
  • 19% fail on Body, chassis, structure (94% worse than other 1996 cars)
    • 6.5% fail on Exhaust system (130% worse than other 1996 cars)
    • 6.5% fail on Transmission (160% worse than other 1996 cars)
      • 6.5% fail on Drive shafts (200% worse than other 1996 cars)
        • 6.5% fail on Joints (2 times worse than other 1996 cars)
    • 5.8% fail on Integral vehicle structure (190% worse than other 1996 cars)
      • 5.2% fail on Integral vehicle structure condition (160% worse than other 1996 cars)
      • 0.65% fail on Sub-frame
        • 0.65% fail on Sub-frame condition
    • 4.5% fail on Chassis (190% worse than other 1996 cars)
      • 4.5% fail on Chassis condition (190% worse than other 1996 cars)
    • 1.3% fail on Fuel system
      • 0.65% fail on Tank
      • 0.65% fail on Fuel cap/sealing device
    • 1.3% fail on Bumpers (5 times worse than other 1996 cars)
    • 0.65% fail on Towbar
      • 0.65% fail on Towbar condition
    • 0.65% fail on Body
      • 0.65% fail on Mounting fixings
    • 0.65% fail on Seats
      • 0.65% fail on Driver's seat
      • 0.65% fail on Passenger's seat
  • 14% fail on Seat belts and supplementary restraint systems (2 times worse than other 1996 cars)
    • 14% fail on Seat belts (3 times worse than other 1996 cars)
      • 14% fail on Prescribed areas (4 times worse than other 1996 cars)
  • 9.7% fail on Brakes
    • 7.7% fail on Brake performance
      • 4.5% fail on Service brake performance
        • 4.5% fail on Rbt
          • 3.9% fail on Service brake performance
          • 0.65% fail on Service brake imbalance
      • 3.2% fail on Service Brake Efficiency (sp)
        • 3.2% fail on Rbt (sp)
          • 2.6% fail on Service brake imbalance
          • 1.3% fail on Service brake performance
      • 1.3% fail on Parking brake efficiency (sp)
        • 1.3% fail on Rbt (sp)
      • 0.65% fail on Brake performance not tested
    • 3.2% fail on Rigid brake pipes
    • 1.9% fail on Mechanical brake components
      • 1.9% fail on Brake discs and drums
        • 1.9% fail on Brake discs
      • 0.65% fail on Brake linings and pads
        • 0.65% fail on Brake pads
    • 0.65% fail on Other components and prescribed areas
      • 0.65% fail on Prescribed areas
        • 0.65% fail on Master cylinder/servo mounting
  • 6.5% fail on Visibility
    • 3.9% fail on Washers
    • 3.2% fail on Wipers
    • 0.65% fail on Condition of glass
      • 0.65% fail on Windscreen
  • 4.5% fail on Steering
    • 3.9% fail on Steering linkage components
      • 1.9% fail on Track rod end
      • 1.3% fail on Intermediate drop arm (16 times worse than other 1996 cars)
      • 0.65% fail on Drag link end
    • 0.65% fail on Steering gear
      • 0.65% fail on Steering box
    • 0.65% fail on Power steering
      • 0.65% fail on Operation
  • 3.9% fail on Noise, emissions and leaks
    • 3.9% fail on Exhaust emissions
      • 3.9% fail on Compression ignition (4 times worse than other 1996 cars)
        • 2.6% fail on Pre 01/07/2008 Turbo (8 times worse than other 1996 cars)
        • 1.3% fail on Emissions not tested (5 times worse than other 1996 cars)
  • 1.9% fail on Identification of the vehicle
    • 1.9% fail on Registration plates
  • 1.3% fail on Road Wheels
    • 1.3% fail on Attachment

Search Good Garages