MOT Results

Honest John Good Garage Guide MOT Results » Chrysler » Delta » 2012

Chrysler Delta MOT Results

Registered in 2012
61.9% pass rate
from 546 tests in 2021
(29% worse than other 2012 cars)
Pass rate by mileage
More MoT Results
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 2012 cars and highlighted areas where the Chrysler Delta is unusually good or bad.

  • 20% fail on Suspension (120% worse than other 2012 cars)
    • 13% fail on Springs (2 times worse than other 2012 cars)
      • 13% fail on Coil springs (2 times worse than other 2012 cars)
        • 13% fail on Coil spring (2 times worse than other 2012 cars)
    • 5.7% fail on Suspension arms (85% worse than other 2012 cars)
      • 2.9% fail on Pins and bushes (130% worse than other 2012 cars)
      • 2.9% fail on Ball joint
      • 0.18% fail on Suspension arm
    • 1.5% fail on Anti-roll bars
      • 0.55% fail on Ball joint
      • 0.37% fail on Linkage ball joint dust cover
      • 0.18% fail on Anti-roll bar
      • 0.18% fail on Linkage ball joints
      • 0.18% fail on Ball joint dust cover
    • 0.92% fail on Axles (10 times worse than other 2012 cars)
      • 0.92% fail on Swivel pins and bushes (11 times worse than other 2012 cars)
    • 0.55% fail on Other suspension component
      • 0.37% fail on Ball joint
      • 0.18% fail on Pins and bushes
    • 0.37% fail on Wheel bearings
    • 0.37% fail on Shock absorbers
  • 10% fail on Lamps, reflectors and electrical equipment
    • 4.6% fail on Headlamps (97% worse than other 2012 cars)
      • 4.6% fail on Headlamp (110% worse than other 2012 cars)
      • 0.18% fail on Headlamp levelling device
    • 3.8% fail on Headlamp aim
      • 2.9% fail on Headlamp aim
      • 0.92% fail on Headlamp aim not tested (2 times worse than other 2012 cars)
    • 1.3% fail on Direction indicators
      • 1.3% fail on Flashing type
        • 1.3% fail on Individual direction indicators
    • 0.92% fail on Registration plate lamp(s)
    • 0.73% fail on Stop lamp
    • 0.55% fail on Front and rear fog lamps
      • 0.55% fail on Rear fog lamp
        • 0.55% fail on Rear fog lamp
    • 0.55% fail on Reversing lamps
      • 0.55% fail on Reversing lamps
    • 0.18% fail on Electrical equipment
      • 0.18% fail on Battery(ies)
  • 9.0% fail on Brakes (50% worse than other 2012 cars)
    • 4.9% fail on Mechanical brake components (76% worse than other 2012 cars)
      • 2.7% fail on Brake discs and drums (180% worse than other 2012 cars)
        • 2.7% fail on Brake discs (180% worse than other 2012 cars)
      • 2.4% fail on Brake linings and pads
        • 2.4% fail on Brake pads
      • 0.18% fail on Brake cables, rods, levers and linkages
        • 0.18% fail on Cable
    • 3.7% fail on Brake performance
      • 2.7% fail on Parking brake efficiency (sp) (170% worse than other 2012 cars)
        • 2.7% fail on Rbt (sp) (190% worse than other 2012 cars)
      • 1.3% fail on Parking brake performance (180% worse than other 2012 cars)
        • 1.3% fail on Rbt (190% worse than other 2012 cars)
          • 1.3% fail on Parking brake performance (2 times worse than other 2012 cars)
      • 1.1% fail on Service brake performance
        • 0.92% fail on Rbt
          • 0.92% fail on Service brake performance
        • 0.18% fail on Plate brake tester
          • 0.18% fail on Service brake efficiency (Trikes, quads and pre-68 vehicles)
      • 0.55% fail on Service Brake Efficiency (sp)
        • 0.55% fail on Rbt (sp)
          • 0.55% fail on Service brake performance
          • 0.18% fail on Service brake imbalance
    • 0.55% fail on Parking brake control
      • 0.55% fail on Lever
    • 0.37% fail on Service brake pedal or hand lever
      • 0.37% fail on Hand lever
    • 0.37% fail on Flexible brake hoses
    • 0.37% fail on ABS / EBS / ESC
      • 0.18% fail on Anti-lock braking system
      • 0.18% fail on Electronic stability control
    • 0.18% fail on Brake actuators (including spring brakes or hydraulic cylinders)
      • 0.18% fail on Hydraulic brake callipers
  • 5.7% fail on Tyres
    • 3.3% fail on Condition
    • 2.6% fail on Tread depth
  • 4.4% fail on Visibility
    • 2.7% fail on Washers
    • 1.5% fail on Wipers
    • 0.37% fail on Driver's view (34 times worse than other 2012 cars)
  • 3.7% fail on Body, chassis, structure
    • 2.0% fail on Exhaust system
    • 0.92% fail on Transmission
      • 0.92% fail on Drive shafts
        • 0.92% fail on Joints
    • 0.37% fail on Fuel system
      • 0.18% fail on Hose
      • 0.18% fail on Pipe
    • 0.37% fail on Engine mounting (16 times worse than other 2012 cars)
      • 0.37% fail on Engine mounting condition (22 times worse than other 2012 cars)
    • 0.18% fail on Doors
      • 0.18% fail on Driver's door
        • 0.18% fail on Door condition
  • 3.5% fail on Steering (130% worse than other 2012 cars)
    • 2.9% fail on Steering linkage components (120% worse than other 2012 cars)
      • 2.9% fail on Track rod end (130% worse than other 2012 cars)
    • 0.37% fail on Steering gear
      • 0.37% fail on Steering rack
    • 0.18% fail on Steering coupling
      • 0.18% fail on Universal joint
  • 2.7% fail on Noise, emissions and leaks
    • 2.7% fail on Exhaust emissions
      • 2.0% fail on Spark ignition
        • 1.1% fail on Catalyst emissions
        • 0.92% fail on Malfunction indicator lamp
      • 0.73% fail on Compression ignition
        • 0.37% fail on Malfunction indicator lamp
        • 0.37% fail on Emissions not tested
        • 0.18% fail on On or after 01/07/2008
  • 0.92% fail on Identification of the vehicle
    • 0.92% fail on Registration plates
  • 0.37% fail on Seat belts and supplementary restraint systems
    • 0.18% fail on Seat belts
      • 0.18% fail on Requirements
    • 0.18% fail on SRS malfunction indicator lamp
Read the Honest John Review

Search Good Garages