Bentley Turbo MOT Results
Registered in 199279.5% pass rate
from 44 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1992 cars and highlighted areas where the Bentley Turbo is unusually good or bad.
-
11% fail on
Noise, emissions and leaks
-
6.8% fail on
Exhaust emissions
-
6.8% fail on
Spark ignition
- 6.8% fail on Catalyst emissions
-
6.8% fail on
Spark ignition
-
4.5% fail on
Fluid leaks
(6 times worse than other 1992 cars)
- 2.3% fail on Engine oil leaks
- 2.3% fail on Hydraulic fluid leaks
-
6.8% fail on
Exhaust emissions
-
9.1% fail on
Brakes
-
9.1% fail on
Brake performance
-
9.1% fail on
Parking brake efficiency (sp)
- 6.8% fail on Rbt (sp)
- 2.3% fail on Decelerometer (sp)
-
2.3% fail on
Parking brake performance
-
2.3% fail on
Rbt
- 2.3% fail on Parking brake performance
-
2.3% fail on
Rbt
-
9.1% fail on
Parking brake efficiency (sp)
-
4.5% fail on
Brake actuators (including spring brakes or hydraulic cylinders)
(12 times worse than other 1992 cars)
- 4.5% fail on Hydraulic brake callipers (26 times worse than other 1992 cars)
-
2.3% fail on
Parking brake control
- 2.3% fail on Lever
-
9.1% fail on
Brake performance
-
9.1% fail on
Lamps, reflectors and electrical equipment
-
4.5% fail on
Headlamps
- 4.5% fail on Headlamp
-
2.3% fail on
Front and rear fog lamps
-
2.3% fail on
Rear fog lamp
- 2.3% fail on Rear fog lamp
-
2.3% fail on
Rear fog lamp
-
2.3% fail on
Mandatory tell-tales
- 2.3% fail on Main beam tell-tale
-
4.5% fail on
Headlamps
-
6.8% fail on
Steering
-
4.5% fail on
Power steering
(9 times worse than other 1992 cars)
- 4.5% fail on Pipes and hoses (46 times worse than other 1992 cars)
-
2.3% fail on
Steering linkage components
- 2.3% fail on Track rod end
-
4.5% fail on
Power steering
(9 times worse than other 1992 cars)
-
6.8% fail on
Suspension
-
4.5% fail on
Suspension arms
- 2.3% fail on Ball joint
- 2.3% fail on Ball joint dust cover
-
2.3% fail on
Other suspension component
- 2.3% fail on Ball joint
- 2.3% fail on Component mounting prescribed areas
-
4.5% fail on
Suspension arms
-
4.5% fail on
Seat belts and supplementary restraint systems
-
4.5% fail on
Seat belts
- 4.5% fail on Condition (7 times worse than other 1992 cars)
-
4.5% fail on
Seat belts
-
2.3% fail on
Visibility
- 2.3% fail on Washers