Bentley Brooklands MOT Results

Registered in 1993
73.3% pass rate
from 45 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1993 cars and highlighted areas where the Bentley Brooklands is unusually good or bad.

  • 11% fail on Lamps, reflectors and electrical equipment
    • 4.4% fail on Registration plate lamp(s)
    • 2.2% fail on Stop lamp
    • 2.2% fail on Front and rear fog lamps
      • 2.2% fail on Rear fog lamp
        • 2.2% fail on Rear fog lamp
    • 2.2% fail on Electrical equipment
      • 2.2% fail on Electrical wiring
  • 11% fail on Suspension
    • 2.2% fail on Springs
      • 2.2% fail on Coil springs
        • 2.2% fail on Coil spring
    • 2.2% fail on Shock absorbers
    • 2.2% fail on Suspension arms
      • 2.2% fail on Ball joint dust cover
    • 2.2% fail on Sub-frames
      • 2.2% fail on Pins and bushes
    • 2.2% fail on Air/gas/fluid suspension
      • 2.2% fail on Suspension unit
      • 2.2% fail on Other components
    • 2.2% fail on Component mounting prescribed areas
  • 6.7% fail on Brakes
    • 6.7% fail on Brake performance
      • 6.7% fail on Parking brake efficiency (sp)
        • 6.7% fail on Rbt (sp)
  • 6.7% fail on Visibility
    • 6.7% fail on Wipers
    • 2.2% fail on Washers
  • 4.4% fail on Steering
    • 4.4% fail on Power steering (8 times worse than other 1993 cars)
      • 2.2% fail on Pump
      • 2.2% fail on Other components
  • 4.4% fail on Tyres
    • 4.4% fail on Condition
  • 2.2% fail on Body, chassis, structure
    • 2.2% fail on Seats
      • 2.2% fail on Driver's seat
  • 2.2% fail on Seat belts and supplementary restraint systems
    • 2.2% fail on Seat belts
      • 2.2% fail on Condition

Search Good Garages