Audi Coupe MOT Results
Registered in 199067.4% pass rate
from 46 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1990 cars and highlighted areas where the Audi Coupe is unusually good or bad.
-
20% fail on
Body, chassis, structure
(140% worse than other 1990 cars)
-
6.5% fail on
Seats
(7 times worse than other 1990 cars)
- 6.5% fail on Driver's seat (9 times worse than other 1990 cars)
- 4.3% fail on Exhaust system
-
4.3% fail on
Fuel system
- 4.3% fail on Pipe (11 times worse than other 1990 cars)
-
2.2% fail on
Chassis
- 2.2% fail on Chassis condition
-
2.2% fail on
Transmission
-
2.2% fail on
Drive shafts
- 2.2% fail on Joints
-
2.2% fail on
Drive shafts
-
2.2% fail on
Doors
-
2.2% fail on
Front passenger's door
- 2.2% fail on Door condition
-
2.2% fail on
Front passenger's door
-
6.5% fail on
Seats
(7 times worse than other 1990 cars)
-
15% fail on
Lamps, reflectors and electrical equipment
- 4.3% fail on Stop lamp
-
4.3% fail on
Electrical equipment
- 2.2% fail on Electrical wiring
- 2.2% fail on Battery(ies)
-
2.2% fail on
Headlamp aim
- 2.2% fail on Headlamp aim
-
2.2% fail on
Direction indicators
-
2.2% fail on
Flashing type
- 2.2% fail on Individual direction indicators
-
2.2% fail on
Flashing type
-
2.2% fail on
Front and rear fog lamps
-
2.2% fail on
Rear fog lamp
- 2.2% fail on Rear fog lamp
-
2.2% fail on
Rear fog lamp
- 2.2% fail on Registration plate lamp(s)
-
15% fail on
Suspension
-
6.5% fail on
Suspension arms
- 6.5% fail on Ball joint (7 times worse than other 1990 cars)
- 4.3% fail on Wheel bearings
-
4.3% fail on
Anti-roll bars
- 2.2% fail on Linkage ball joints
- 2.2% fail on Linkage ball joint dust cover
-
4.3% fail on
Other suspension component
(11 times worse than other 1990 cars)
- 2.2% fail on Attachment bracket and mounting
- 2.2% fail on Ball joint
- 2.2% fail on Shock absorbers
-
6.5% fail on
Suspension arms
-
11% fail on
Brakes
-
11% fail on
Brake performance
-
8.7% fail on
Parking brake efficiency (sp)
- 6.5% fail on Rbt (sp)
- 2.2% fail on Decelerometer (sp)
- 2.2% fail on Brake performance not tested
-
2.2% fail on
Parking brake performance
-
2.2% fail on
Rbt
- 2.2% fail on Parking brake performance
-
2.2% fail on
Rbt
-
8.7% fail on
Parking brake efficiency (sp)
-
2.2% fail on
Hydraulic systems
- 2.2% fail on Brake fluid
- 2.2% fail on Rigid brake pipes
-
11% fail on
Brake performance
-
8.7% fail on
Noise, emissions and leaks
-
6.5% fail on
Exhaust emissions
-
6.5% fail on
Spark ignition
- 4.3% fail on Non catalyst emissions
- 2.2% fail on Emissions not tested
-
6.5% fail on
Spark ignition
-
2.2% fail on
Fluid leaks
- 2.2% fail on Other leaks
-
6.5% fail on
Exhaust emissions
-
4.3% fail on
Steering
-
4.3% fail on
Steering linkage components
- 4.3% fail on Track rod end
- 2.2% fail on Steering column
-
4.3% fail on
Steering linkage components
-
4.3% fail on
Visibility
- 4.3% fail on Washers
- 2.2% fail on Wipers
-
2.2% fail on
Seat belts and supplementary restraint systems
-
2.2% fail on
Seat belts
- 2.2% fail on Condition
-
2.2% fail on
Seat belts