Peugeot 405 MOT Results
Registered in 199768.0% pass rate
from 25 tests in 2021
More MoT Results
Failure rates by item
Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1997 cars and highlighted areas where the Peugeot 405 is unusually good or bad.
-
20% fail on
Steering
(4 times worse than other 1997 cars)
-
20% fail on
Steering gear
(16 times worse than other 1997 cars)
- 20% fail on Steering rack (17 times worse than other 1997 cars)
-
20% fail on
Steering gear
(16 times worse than other 1997 cars)
-
16% fail on
Suspension
- 12% fail on Component mounting prescribed areas
- 4.0% fail on Wheel bearings
-
4.0% fail on
Other suspension component
- 4.0% fail on Pins and bushes
-
12% fail on
Brakes
-
12% fail on
Brake performance
-
8.0% fail on
Service brake performance
-
8.0% fail on
Rbt
- 8.0% fail on Service brake performance
-
8.0% fail on
Rbt
- 4.0% fail on Brake performance not tested
-
8.0% fail on
Service brake performance
-
8.0% fail on
Mechanical brake components
-
4.0% fail on
Brake linings and pads
- 4.0% fail on Brake pads
-
4.0% fail on
Brake discs and drums
- 4.0% fail on Brake discs
-
4.0% fail on
Brake linings and pads
- 4.0% fail on Rigid brake pipes
- 4.0% fail on Load sensing valves
-
12% fail on
Brake performance
-
12% fail on
Visibility
- 8.0% fail on Wipers
- 4.0% fail on Washers
-
12% fail on
Body, chassis, structure
-
4.0% fail on
Chassis
- 4.0% fail on Chassis condition
-
4.0% fail on
Transmission
-
4.0% fail on
Drive shafts
- 4.0% fail on Joints
-
4.0% fail on
Drive shafts
-
4.0% fail on
Doors
-
4.0% fail on
Other passenger's door
- 4.0% fail on Door condition
-
4.0% fail on
Other passenger's door
-
4.0% fail on
Chassis
-
4.0% fail on
Lamps, reflectors and electrical equipment
- 4.0% fail on Registration plate lamp(s)
-
4.0% fail on
Tyres
- 4.0% fail on Condition
- 4.0% fail on Tread depth
