Peugeot 309 MOT Results

Registered in 1988
60.0% pass rate
from 25 tests in 2021
Failure rates by item

Here you can drill down into the failure rates for each item on the test. We've also compared the rates to the average results for 1988 cars and highlighted areas where the Peugeot 309 is unusually good or bad.

  • 28% fail on Suspension (2 times worse than other 1988 cars)
    • 16% fail on Component mounting prescribed areas (3 times worse than other 1988 cars)
    • 12% fail on Wheel bearings (5 times worse than other 1988 cars)
    • 12% fail on Suspension arms (4 times worse than other 1988 cars)
      • 8.0% fail on Ball joint (9 times worse than other 1988 cars)
      • 4.0% fail on Ball joint dust cover
  • 16% fail on Brakes
    • 8.0% fail on Brake performance
      • 8.0% fail on Parking brake performance (6 times worse than other 1988 cars)
        • 8.0% fail on Rbt (6 times worse than other 1988 cars)
          • 8.0% fail on Parking brake performance (8 times worse than other 1988 cars)
      • 8.0% fail on Parking brake efficiency (sp)
        • 8.0% fail on Rbt (sp)
    • 4.0% fail on Service brake pedal or hand lever
      • 4.0% fail on Pedal
    • 4.0% fail on Parking brake control
      • 4.0% fail on Lever
    • 4.0% fail on Mechanical brake components
      • 4.0% fail on Brake cables, rods, levers and linkages
        • 4.0% fail on Lever
  • 8.0% fail on Visibility
    • 8.0% fail on Washers
  • 8.0% fail on Body, chassis, structure
    • 4.0% fail on Bumpers
    • 4.0% fail on Transmission
      • 4.0% fail on Drive shafts
        • 4.0% fail on Joints
  • 4.0% fail on Identification of the vehicle
    • 4.0% fail on Registration plates
  • 4.0% fail on Lamps, reflectors and electrical equipment
    • 4.0% fail on Mandatory tell-tales
      • 4.0% fail on Rear fog lamp tell-tale

Search Good Garages